Hello community, here is the log from the commit of package kiwi for openSUSE:Factory checked in at 2015-05-03 09:47:30 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/kiwi (Old) and /work/SRC/openSUSE:Factory/.kiwi.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "kiwi" Changes: -------- --- /work/SRC/openSUSE:Factory/kiwi/kiwi.changes 2015-05-02 21:32:25.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.kiwi.new/kiwi.changes 2015-05-03 09:47:32.000000000 +0200 @@ -2,254 +1,0 @@ -Fri May 1 20:40:57 CEST 2015 - m...@suse.de - -- v7.02.42 released - -------------------------------------------------------------------- -Thu Apr 30 16:20:32 CEST 2015 - m...@suse.de - -- Update RHEL7 JeOS template - - Added lan0 udev rule, don't use lvm to simplify setup - -------------------------------------------------------------------- -Thu Apr 30 10:51:16 CEST 2015 - m...@suse.de - -- Fixed use of custom kernel options for recovery - - custom kernel paratmers are stored in $kiwi_cmdline inside - of the boot code. The information was not used for the recovery - grub config. Therefore a difference in kernel boot options for - standard boot and for recovery boot could happen which should - not be the case - -------------------------------------------------------------------- -Thu Apr 30 10:39:37 CEST 2015 - m...@suse.de - -- Fixed boot_efilabel for elilo compat mode - - The efi boot label should match the title set in the bootloader - menu. This is should be set to kiwi_oemtitle - -------------------------------------------------------------------- -Wed Apr 29 11:45:46 CEST 2015 - m...@suse.de - -- v7.02.41 released - -------------------------------------------------------------------- -Wed Apr 29 11:21:02 CEST 2015 - m...@suse.de - -- Run lvcreate with --noudevsync - - This allows to build LVM images in container systems - which doesn't have udev running - -------------------------------------------------------------------- -Wed Apr 29 10:54:48 CEST 2015 - m...@suse.de - -- Update SLE12 JeOS description - - The new pattern system requires libsolv >= 0.6.5 to be installed on - the building host. Thus solve patterns as package to stay compatible - with older build host systems - -------------------------------------------------------------------- -Wed Apr 29 10:51:42 CEST 2015 - m...@suse.de - -- Added dice buildsystem config to x86 JeOS images - -------------------------------------------------------------------- -Wed Apr 29 09:06:00 CEST 2015 - rjsch...@suse.de - -- The linuxefi and initrdefi commands only exists on x86 and x86_64. - Write the grub config setting for linuxefi and initrdefi only on these - platforms, for all others the appropriate command is linux and initrd. - -------------------------------------------------------------------- -Fri Apr 24 12:01:52 CEST 2015 - m...@suse.de - -- Keep terminal reset utility inside boot images - -------------------------------------------------------------------- -Fri Apr 24 09:51:42 CEST 2015 - m...@suse.de - -- Fixed useless use of greediness modifier '+' in regex - -------------------------------------------------------------------- -Thu Apr 23 13:13:40 CEST 2015 - rjsch...@suse.de - -- Builder infrastructure - + Integrate ext* file system image builds into the "builder" - infrastructure to simplify and improve the structure of image builds - -------------------------------------------------------------------- -Thu Apr 23 09:51:19 CEST 2015 - m...@suse.de - -- Style changes for mount dependency checker - - * Use here documents to construct messages - * Use pstree to show sub tree of processes - * Use perl builtin methods to read from proc - -------------------------------------------------------------------- -Wed Apr 22 21:16:46 CEST 2015 - m...@suse.de - -- Fixed product name in SLE12 s390 JeOS - -------------------------------------------------------------------- -Wed Apr 22 21:04:08 CEST 2015 - m...@suse.de - -- Better description for pattern use in 13.2 JeOS - -------------------------------------------------------------------- -Wed Apr 22 15:47:42 CEST 2015 - m...@suse.de - -- Fetch errno($!) directly after call - - Reading of $! later will not provide the information - -------------------------------------------------------------------- -Wed Apr 22 15:36:57 CEST 2015 - m...@suse.de - -- Added __checkMountDependencies runtime check - - The check looks for processes which holds onto mounts created by a - previos kiwi run. In such a condition kiwi is not able to release - its own mount table and shows information about the processes which - keeps these mount points busy. We still don't understand why there - could be non kiwi related processes holding onto mounts kiwi has - created during its run but kiwi should provide a way to tell this - information to the user and stop if the environment is still tainted - by such processes (bnc #895204) - -------------------------------------------------------------------- -Tue Apr 21 16:38:30 CEST 2015 - m...@suse.de - -- Added __checkDeprecatedFilesystem runtime check - - The use of clicfs is deprecated, a hint to use overlayfs if - possible is shown as a warning message to the user - -------------------------------------------------------------------- -Tue Apr 21 14:56:23 CEST 2015 - m...@suse.de - -- Delete kernel/adaptec-firmware from boot images - - For s390 there are no such packages in the SLE12 code base - -------------------------------------------------------------------- -Tue Apr 21 12:21:56 CEST 2015 - m...@suse.de - -- v7.02.40 released - -------------------------------------------------------------------- -Tue Apr 21 12:06:24 CEST 2015 - adr...@suse.de - -- remove call to addAppdata again - - merge error - -------------------------------------------------------------------- -Mon Apr 20 15:26:43 CEST 2015 - m...@suse.de - -- v7.02.39 released - -------------------------------------------------------------------- -Mon Apr 20 13:43:31 CEST 2015 - adr...@suse.de - -- prefer packages by priority of repositories, not by architectures. - -------------------------------------------------------------------- -Mon Apr 20 13:00:53 CEST 2015 - m...@suse.de - -- Ensure recovery entry is appended for elilo compat - - elilo does not support adding custom entries to the written - grub configuration. Thus we have to make sure the recovery - entry doesn't get lost after a recovery run. Therefore the - menu entry is added as part of the installBootloader function - because this function is called after a recovery run while - the installBootloaderRecovery functions are only called once - at initialization time of the recovery partition - -------------------------------------------------------------------- -Mon Apr 20 12:33:31 CEST 2015 - m...@suse.de - -- Fixed missing boot/efi mount path after recovery - - In recovery/repair mode the boot/efi path is not umounted - correctly when init/systemd is started. Both paths /boot and - /boot/efi are part of the fstab and if boot/efi is already - mounted when fstab is processed the mount of /boot will - cover and therefore hide the contents of boot/efi - -------------------------------------------------------------------- -Fri Apr 17 10:02:37 CEST 2015 - m...@suse.de - -- v7.02.38 released - -------------------------------------------------------------------- -Thu Apr 16 10:49:09 CEST 2015 - m...@suse.de - -- Revert "Added gptfdisk to SLE11 oemboot descriptions" - - This reverts commit 8a49b0d75f583cc4f18fdb57fb36722777e71725. - -------------------------------------------------------------------- -Thu Apr 16 10:37:18 CEST 2015 - m...@suse.de - ++++ 57 more lines (skipped) ++++ between /work/SRC/openSUSE:Factory/kiwi/kiwi.changes ++++ and /work/SRC/openSUSE:Factory/.kiwi.new/kiwi.changes ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ kiwi.spec ++++++ --- /var/tmp/diff_new_pack.yxkbNU/_old 2015-05-03 09:47:34.000000000 +0200 +++ /var/tmp/diff_new_pack.yxkbNU/_new 2015-05-03 09:47:34.000000000 +0200 @@ -26,7 +26,7 @@ Group: System/Management Url: http://github.com/openSUSE/kiwi Name: kiwi -Version: 7.02.42 +Version: 7.02.37 Release: 0 Provides: kiwi-image:lxc Provides: kiwi-image:tbz ++++++ kiwi-docu.tar.bz2 ++++++ ++++++ kiwi-repo.tar.bz2 ++++++ ++++++ kiwi.tar.bz2 ++++++ ++++ 4047 lines of diff (skipped)
