Hello community, here is the log from the commit of package openvswitch for openSUSE:Factory checked in at 2016-04-14 13:07:56 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/openvswitch (Old) and /work/SRC/openSUSE:Factory/.openvswitch.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "openvswitch" Changes: -------- --- /work/SRC/openSUSE:Factory/openvswitch/openvswitch.changes 2016-03-07 13:27:15.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.openvswitch.new/openvswitch.changes 2016-04-14 13:07:57.000000000 +0200 @@ -1,0 +2,88 @@ +Fri Apr 1 10:39:26 UTC 2016 - [email protected] + +- address dimstars concerns + +------------------------------------------------------------------- +Tue Mar 22 18:06:40 UTC 2016 - [email protected] + +- Prevent systemd from autogenerating a service file for + openvswitch-switch which conflicts with the opevswitch + one. (bsc#966762) + +------------------------------------------------------------------- +Fri Mar 18 10:20:02 UTC 2016 - [email protected] + +- Add missing %defattr to ovn files section. + +------------------------------------------------------------------- +Tue Mar 8 13:16:03 UTC 2016 - [email protected] + +- Add additional install requirements for python-openvswitch-test + package. + +------------------------------------------------------------------- +Fri Mar 4 14:38:16 UTC 2016 - [email protected] + +- Add support for building both 2.4.0 and 2.5.0 from the same spec + file. Needed to fix SLE11 builds as OVS-2.5.0 no longer supports + python < 2.7. SLE11 SP3 and SP4 use python 2.6. +- Added: openvswitch-2.4.0.tar.gz + +------------------------------------------------------------------- +Thu Mar 3 13:47:04 UTC 2016 - [email protected] + +- New upstream version 2.5.0 (LTS) + - Dropped support for Python older than version 2.7. As a consequence, + using Open vSwitch 2.5 or later on XenServer 6.5 or earlier (which + have Python 2.4) requires first installing Python 2.7. + - OpenFlow: + * Group chaining (where one OpenFlow group triggers another) is + now supported. + * OpenFlow 1.4+ "importance" is now considered for flow eviction. + * OpenFlow 1.4+ OFPTC_EVICTION is now implemented. + * OpenFlow 1.4+ OFPTC_VACANCY_EVENTS is now implemented. + * OpenFlow 1.4+ OFPMP_TABLE_DESC is now implemented. + * Allow modifying the ICMPv4/ICMPv6 type and code fields. + * OpenFlow 1.4+ OFPT_SET_ASYNC_CONFIG and OFPT_GET_ASYNC_CONFIG are + now implemented. + - ovs-ofctl: + * New "out_group" keyword for OpenFlow 1.1+ matching on output group. + - Tunnels: + * Geneve tunnels can now match and set options and the OAM bit. + * The nonstandard GRE64 tunnel extension has been dropped. + - Support Multicast Listener Discovery (MLDv1 and MLDv2). + - Add 'symmetric_l3l4' and 'symmetric_l3l4+udp' hash functions. + - sFlow agent now reports tunnel and MPLS structures. + - New 'check-system-userspace', 'check-kmod' and 'check-kernel' Makefile + targets to run a new system testsuite. These tests can be run inside + a Vagrant box. See INSTALL.md for details + - Mark --syslog-target argument as deprecated. It will be removed in + the next OVS release. + - Added --user option to all daemons + - Add support for connection tracking through the new "ct" action + and "ct_state"/"ct_zone"/"ct_mark"/"ct_label" match fields. Only + available on Linux kernels with the connection tracking module loaded. + - Add experimental version of OVN. OVN, the Open Virtual Network, is a + system to support virtual network abstraction. OVN complements the + existing capabilities of OVS to add native support for virtual network + abstractions, such as virtual L2 and L3 overlays and security groups. + - RHEL packaging: + * DPDK ports may now be created via network scripts (see README.RHEL). + - DPDK: + * Requires DPDK 2.2 + * Added multiqueue support to vhost-user + * Note: QEMU 2.5+ required for multiqueue support + - SELinux: + * Introduced SELinux policy package. + +- New package: openvswitch-ovn +- Removed: openvswitch-2.4.0.tar.gg +- Added: openvswitch-2.5.0.tar.gg +- Added: openvswitch-testcontroller.init +- Added: ovn-controller-vtep.service +- Added: ovn-controller.service +- Added: ovn-northd.service +- TODO: Explicit DPDK support not yet added to spec. +- Spec file work and cleanup. + +------------------------------------------------------------------- Old: ---- openvswitch-2.4.0.tar.gz New: ---- openvswitch-2.5.0.tar.gz openvswitch-testcontroller.init ovn-controller-vtep.service ovn-controller.service ovn-northd.service ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ openvswitch.spec ++++++ --- /var/tmp/diff_new_pack.4SxL86/_old 2016-04-14 13:07:59.000000000 +0200 +++ /var/tmp/diff_new_pack.4SxL86/_new 2016-04-14 13:07:59.000000000 +0200 @@ -24,7 +24,7 @@ %bcond_with gui Name: openvswitch -Version: 2.4.0 +Version: 2.5.0 Release: 0 Summary: An open source, production quality, multilayer virtual switch License: Apache-2.0 @@ -37,8 +37,14 @@ Source5: openvswitch-vtep.init Source6: openvswitch-ipsec.init Source7: openvswitch.service +Source8: openvswitch-testcontroller.init Source10: Module.supported Source11: Module.supported.updates +%if 0%{?suse_version} > 1110 +Source12: ovn-controller.service +Source13: ovn-controller-vtep.service +Source14: ovn-northd.service +%endif Source99: README.packager Patch2: log-check-module-loop.patch BuildRequires: autoconf @@ -146,6 +152,22 @@ Open vSwitch is a full-featured software-based Ethernet switch. +%if 0%{?suse_version} > 1110 +%package ovn +Summary: Open vSwitch - Open Virtual Network support +License: Apache-2.0 +Group: Productivity/Networking/System +Requires: openvswitch = %{version} +Requires: openvswitch-switch = %{version} +Requires: openvswitch-vtep = %{version} + +%description ovn +OVN, the Open Virtual Network, is a system to support virtual network +abstraction. OVN complements the existing capabilities of OVS to add +native support for virtual network abstractions, such as virtual L2 and L3 +overlays and security groups. +%endif + %package pki Summary: Open vSwitch public key infrastructure dependency package License: Apache-2.0 @@ -164,6 +186,7 @@ License: Apache-2.0 Group: Productivity/Networking/System Requires: openvswitch = %{version} +Requires: openvswitch-switch = %{version} # Since openvswitch/scripts/ovs-vtep requires various ovs python modules. Requires: python-openvswitch = %{version} @@ -195,6 +218,7 @@ Summary: Python bindings for Open vSwitch License: Python-2.0 Group: Productivity/Networking/System +Requires: openvswitch = %{version} Requires: python %description -n python-openvswitch @@ -204,7 +228,10 @@ Summary: Python bindings for Open vSwitch License: Python-2.0 Group: Productivity/Networking/System +Requires: openvswitch = %{version} Requires: python +Requires: python-openvswitch = %{version} +Requires: python-twisted %description -n python-openvswitch-test This package contains the full Python bindings for Open vSwitch database. @@ -240,6 +267,7 @@ Summary: Open vSwitch test package License: Apache-2.0 Group: Productivity/Networking/System +Requires: openvswitch = %{version} Requires: python Requires: python-argparse Requires: python-openvswitch-test = %{version} @@ -322,6 +350,7 @@ pushd source %makeinstall +install -d -m 755 %{buildroot}/%{_datadir}/%{name}/scripts install -d -m 755 %{buildroot}/%{_sysconfdir}/init.d install -d -m 755 %{buildroot}%{_localstatedir}/adm/fillup-templates @@ -329,15 +358,29 @@ %{buildroot}/%{_sysconfdir}/init.d/%{name}-switch install -m 755 %{SOURCE5} \ %{buildroot}/%{_sysconfdir}/init.d/%{name}-vtep +install -m 755 %{SOURCE8} \ + %{buildroot}/%{_sysconfdir}/init.d/%{name}-testcontroller %if 0%{?suse_version} > 1230 -ln -sf %_sbindir/service %{buildroot}%{_sbindir}/rc%{name}-switch +ln -sf %_sbindir/service %{buildroot}%{_sbindir}/rc%{name} ln -sf %_sbindir/service %{buildroot}%{_sbindir}/rc%{name}-vtep +ln -sf %_sbindir/service %{buildroot}%{_sbindir}/rc%{name}-testcontroller +# Move the openvswitch-switch rc file to the scripts directory +# to prevent systemd from autogenerating a unit file for us (bsc#966762) +mv %{buildroot}/%{_sysconfdir}/init.d/%{name}-switch \ + %{buildroot}/%{_datadir}/%{name}/scripts/%{name}-switch install -D -m 644 %{SOURCE7} \ %{buildroot}%{_unitdir}/openvswitch.service +install -D -m 644 %{SOURCE12} \ + %{buildroot}%{_unitdir}/ovn-controller.service +install -D -m 644 %{SOURCE13} \ + %{buildroot}%{_unitdir}/ovn-controller-vtep.service +install -D -m 644 %{SOURCE14} \ + %{buildroot}%{_unitdir}/ovn-northd.service %else ln -sf %{_sysconfdir}/init.d/%{name}-switch %{buildroot}%{_sbindir}/rc%{name}-switch ln -sf %{_sysconfdir}/init.d/%{name}-vtep %{buildroot}%{_sbindir}/rc%{name}-vtep +ln -sf %{_sysconfdir}/init.d/%{name}-testcontroller %{buildroot}%{_sbindir}/rc%{name}-testcontroller %endif install -d -m 755 %{buildroot}/%{_sysconfdir}/sysconfig @@ -348,7 +391,6 @@ %{buildroot}/%{_sysconfdir}/logrotate.d/%{name}-switch install -d -m 755 %{buildroot}/%{_sysconfdir}/profile.d -install -d -m 755 %{buildroot}/%{_datadir}/%{name}/scripts install -m 644 vswitchd/vswitch.ovsschema \ %{buildroot}/%{_datadir}/%{name}/vswitch.ovsschema @@ -395,6 +437,44 @@ %endif %insserv_cleanup +%if 0%{?suse_version} > 1110 +%pre ovn +%if 0%{?suse_version} > 1230 +%service_add_pre ovn-controller.service +%service_add_pre ovn-controller-vtep.service +%service_add_pre ovn-northd.service +%endif + +%post ovn +/sbin/ldconfig +%if 0%{?suse_version} > 1230 +%service_add_post ovn-controller.service +%service_add_post ovn-controller-vtep.service +%service_add_post ovn-northd.service +%endif + +%preun ovn +%if 0%{?suse_version} > 1230 +%service_del_preun ovn-controller.service +%service_del_preun ovn-controller-vtep.service +%service_del_preun ovn-northd.service +%endif + +%postun ovn +%if 0%{?suse_version} > 1230 +%service_del_postun ovn-controller.service +%service_del_postun ovn-controller-vtep.service +%service_del_postun ovn-northd.service +%endif +/sbin/ldconfig +%endif + +%preun test +%stop_on_removal openvswitch-testcontroller + +%postun test +%restart_on_update openvswitch-testcontroller + %post vtep -p /sbin/ldconfig %preun vtep @@ -496,8 +576,6 @@ %{_datadir}/openvswitch/scripts/ovs-save %{_datadir}/openvswitch/vswitch.ovsschema %{_sysconfdir}/bash_completion.d/ovs-vsctl-bashcomp.bash -%{_sysconfdir}/init.d/openvswitch-switch -%{_sbindir}/rc%{name}-switch %config(noreplace) %{_sysconfdir}/logrotate.d/openvswitch-switch %{_mandir}/man8/ovs-dpctl.8.gz %{_mandir}/man1/ovs-tcpundump.1.gz @@ -509,10 +587,45 @@ %{_mandir}/man5/ovs-vswitchd.conf.db.5.gz %{_mandir}/man8/ovs-ctl.8.gz %if 0%{?suse_version} > 1230 +%{_sbindir}/rc%{name} %{_unitdir}/openvswitch.service +%{_datadir}/openvswitch/scripts/openvswitch-switch +%else +%{_sbindir}/rc%{name}-switch +%{_sysconfdir}/init.d/openvswitch-switch %endif %dir /var/log/openvswitch +%if 0%{?suse_version} > 1110 +%files ovn +%defattr(-,root,root) +%{_bindir}/ovn-controller +%{_bindir}/ovn-controller-vtep +%{_bindir}/ovn-docker-overlay-driver +%{_bindir}/ovn-docker-underlay-driver +%{_bindir}/ovn-nbctl +%{_bindir}/ovn-northd +%{_bindir}/ovn-sbctl +%{_datadir}/openvswitch/scripts/ovn-ctl +%{_libdir}/libovn.so.* +%{_mandir}/man5/ovn-nb.5* +%{_mandir}/man5/ovn-sb.5* +%{_mandir}/man7/ovn-architecture.7* +%{_mandir}/man8/ovn-controller.8* +%{_mandir}/man8/ovn-controller-vtep.8* +%{_mandir}/man8/ovn-ctl.8* +%{_mandir}/man8/ovn-nbctl.8* +%{_mandir}/man8/ovn-northd.8* +%{_mandir}/man8/ovn-sbctl.8* +%config %{_datadir}/openvswitch/ovn-nb.ovsschema +%config %{_datadir}/openvswitch/ovn-sb.ovsschema +%if 0%{?suse_version} > 1230 +%{_unitdir}/ovn-controller.service +%{_unitdir}/ovn-controller-vtep.service +%{_unitdir}/ovn-northd.service +%endif +%endif + %files test %defattr(-,root,root) %{_bindir}/ovs-test @@ -523,6 +636,8 @@ %{_mandir}/man8/ovs-l3ping.8.gz %{_mandir}/man8/ovs-vlan-test.8.gz %{_mandir}/man8/ovs-testcontroller.8.gz +%{_sysconfdir}/init.d/openvswitch-testcontroller +%{_sbindir}/rc%{name}-testcontroller %files devel %defattr(-,root,root) @@ -530,6 +645,10 @@ %{_libdir}/libofproto.la %{_libdir}/libopenvswitch.so %{_libdir}/libopenvswitch.la +%if 0%{?suse_version} > 1110 +%{_libdir}/libovn.so +%exclude %{_libdir}/libovn.la +%endif %{_libdir}/libovsdb.so %{_libdir}/libovsdb.la %{_libdir}/libsflow.so ++++++ openvswitch-2.4.0.tar.gz -> openvswitch-2.5.0.tar.gz ++++++ ++++ 591148 lines of diff (skipped) ++++++ openvswitch-testcontroller.init ++++++ #!/bin/sh # # Copyright (c) 2011, 2014 Nicira, Inc. # Copyright (c) 2007, 2009 Javier Fernandez-Sanguino <[email protected]> # # This is free software; you may redistribute it and/or modify # it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2, # or (at your option) any later version. # # This is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License with # the Debian operating system, in /usr/share/common-licenses/GPL; if # not, write to the Free Software Foundation, Inc., 59 Temple Place, # Suite 330, Boston, MA 02111-1307 USA # ### BEGIN INIT INFO # Provides: openvswitch-testcontroller # Required-Start: $network $local_fs $remote_fs # Required-Stop: $remote_fs # Should-Start: $named # Should-Stop: $null # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Simple OpenFlow controller for testing # Description: This controller enables OpenFlow switches that connect to # it to act as MAC-learning Ethernet switches. ### END INIT INFO PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin DAEMON=/usr/bin/ovs-testcontroller # Introduce the server's location here NAME=ovs-testcontroller # Introduce the short server's name here DESC=ovs-testcontroller # Introduce a short description here LOGDIR=/var/log/openvswitch # Log directory to use PIDFILE=/var/run/openvswitch/$NAME.pid test -x $DAEMON || exit 0 . /lib/lsb/init-functions # Default options, these can be overriden by the information # at /etc/default/openvswitch-testcontroller DAEMON_OPTS="" # Additional options given to the server DODTIME=10 # Time to wait for the server to die, in seconds # If this value is set too low you might not # let some servers to die gracefully and # 'restart' will not work LOGFILE=$LOGDIR/$NAME.log # Server logfile #DAEMONUSER= # User to run the daemons as. If this value # is set start-stop-daemon will chuid the server # Include defaults if available default=/etc/default/openvswitch-testcontroller if [ -f $default ] ; then . $default fi # Check that the user exists (if we set a user) # Does the user exist? if [ -n "$DAEMONUSER" ] ; then if getent passwd | grep -q "^$DAEMONUSER:"; then # Obtain the uid and gid DAEMONUID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $3}'` DAEMONGID=`getent passwd |grep "^$DAEMONUSER:" | awk -F : '{print $4}'` else log_failure_msg "The user $DAEMONUSER, required to run $NAME does not exist." exit 1 fi fi set -e running_pid() { # Check if a given process pid's cmdline matches a given name pid=$1 name=$2 [ -z "$pid" ] && return 1 [ ! -d /proc/$pid ] && return 1 cmd=`cat /proc/$pid/cmdline | tr "\000" "\n"|head -n 1 |cut -d : -f 1` # Is this the expected server [ "$cmd" != "$name" ] && return 1 return 0 } running() { # Check if the process is running looking at /proc # (works for all users) # No pidfile, probably no daemon present [ ! -f "$PIDFILE" ] && return 1 pid=`cat $PIDFILE` running_pid $pid $DAEMON || return 1 return 0 } start_server() { if [ -z "$LISTEN" ]; then echo "$default: No connection methods configured, controller disabled" >&2 exit 0 fi if [ ! -d /var/run/openvswitch ]; then install -d -m 755 -o root -g root /var/run/openvswitch fi SSL_OPTS= case $LISTEN in *ssl*) : ${PRIVKEY:=/etc/openvswitch-testcontroller/privkey.pem} : ${CERT:=/etc/openvswitch-testcontroller/cert.pem} : ${CACERT:=/etc/openvswitch-testcontroller/cacert.pem} if test ! -e "$PRIVKEY" || test ! -e "$CERT" || test ! -e "$CACERT"; then if test ! -e "$PRIVKEY"; then echo "$PRIVKEY: private key missing" >&2 fi if test ! -e "$CERT"; then echo "$CERT: certificate for private key missing" >&2 fi if test ! -e "$CACERT"; then echo "$CACERT: CA certificate missing" >&2 fi exit 1 fi SSL_OPTS="--private-key=$PRIVKEY --certificate=$CERT --ca-cert=$CACERT" ;; esac # Start the process using the wrapper if [ -z "$DAEMONUSER" ] ; then start-stop-daemon --start --pidfile $PIDFILE \ --exec $DAEMON -- --detach --pidfile=$PIDFILE \ $LISTEN $DAEMON_OPTS $SSL_OPTS errcode=$? else # if we are using a daemonuser then change the user id start-stop-daemon --start --quiet --pidfile $PIDFILE \ --chuid $DAEMONUSER --exec $DAEMON -- \ --detach --pidfile=$PIDFILE $LISTEN $DAEMON_OPTS \ $SSL_OPTS errcode=$? fi return $errcode } stop_server() { # Stop the process using the wrapper if [ -z "$DAEMONUSER" ] ; then start-stop-daemon --stop --quiet --pidfile $PIDFILE \ --exec $DAEMON errcode=$? else # if we are using a daemonuser then look for process that match start-stop-daemon --stop --quiet --pidfile $PIDFILE \ --user $DAEMONUSER --exec $DAEMON errcode=$? fi return $errcode } reload_server() { [ ! -f "$PIDFILE" ] && return 1 pid=`cat $PIDFILE` # This is the daemon's pid # Send a SIGHUP kill -1 $pid return $? } force_stop() { # Force the process to die killing it manually [ ! -e "$PIDFILE" ] && return if running ; then kill -15 $pid # Is it really dead? sleep "$DODTIME" if running ; then kill -9 $pid sleep "$DODTIME" if running ; then echo "Cannot kill $NAME (pid=$pid)!" exit 1 fi fi fi rm -f $PIDFILE } case "$1" in start) log_daemon_msg "Starting $DESC " "$NAME" # Check if it's running first if running ; then log_progress_msg "apparently already running" log_end_msg 0 exit 0 fi if start_server && running ; then # It's ok, the server started and is running log_end_msg 0 else # Either we could not start it or it is not running # after we did # NOTE: Some servers might die some time after they start, # this code does not try to detect this and might give # a false positive (use 'status' for that) log_end_msg 1 fi ;; stop) log_daemon_msg "Stopping $DESC" "$NAME" if running ; then # Only stop the server if we see it running stop_server log_end_msg $? else # If it's not running don't do anything log_progress_msg "apparently not running" log_end_msg 0 exit 0 fi ;; force-stop) # First try to stop gracefully the program $0 stop if running; then # If it's still running try to kill it more forcefully log_daemon_msg "Stopping (force) $DESC" "$NAME" force_stop log_end_msg $? fi ;; restart|force-reload) log_daemon_msg "Restarting $DESC" "$NAME" if running; then stop_server # Wait some sensible amount, some server need this. [ -n "$DODTIME" ] && sleep $DODTIME fi start_server running log_end_msg $? ;; status) log_daemon_msg "Checking status of $DESC" "$NAME" if running ; then log_progress_msg "running" log_end_msg 0 else log_progress_msg "apparently not running" log_end_msg 1 exit 1 fi ;; # Use this if the daemon cannot reload reload) log_warning_msg "Reloading $NAME daemon: not implemented, as the daemon" log_warning_msg "cannot re-read the config file (use restart)." ;; *) N=/etc/init.d/openvswitch-testcontroller echo "Usage: $N {start|stop|force-stop|restart|force-reload|status}" >&2 exit 1 ;; esac exit 0 ++++++ openvswitch.service ++++++ --- /var/tmp/diff_new_pack.4SxL86/_old 2016-04-14 13:08:03.000000000 +0200 +++ /var/tmp/diff_new_pack.4SxL86/_new 2016-04-14 13:08:03.000000000 +0200 @@ -5,8 +5,8 @@ [Service] Type=oneshot -ExecStart=/etc/init.d/openvswitch-switch start -ExecStop=/etc/init.d/openvswitch-switch stop +ExecStart=/usr/share/openvswitch/scripts/openvswitch-switch start +ExecStop=/usr/share/openvswitch/scripts/openvswitch-switch stop RemainAfterExit=yes [Install] ++++++ ovn-controller-vtep.service ++++++ # # You may override the following variables to customize ovn-controller-vtep # behavior: # # OVN_DB - Set this variable to the location of the ovsdb server that is # serving the OVN_Southbound database. See the manpage for # ovn-controller-vtep for more details on the format for the db # location. # # VTEP_DB - Set this variable to the location of the ovsdb server that is # serving the hardware_vtep database. See the manpage for # ovn-controller-vtep for more details on the format for the db # location. # [Unit] Description=OVN VTEP gateway controller daemon After=syslog.target Requires=openvswitch.service After=openvswitch.service [Service] Type=simple Environment=OVS_RUNDIR=%t/openvswitch Environment=OVN_DB=unix:%t/openvswitch/db.sock Environment=VTEP_DB=unix:%t/openvswitch/db.sock ExecStart=/usr/bin/ovn-controller-vtep -vconsole:emer -vsyslog:err -vfile:info \ --log-file=/var/log/openvswitch/ovn-controller-vtep.log \ --no-chdir --pidfile=${OVS_RUNDIR}/ovn-controller-vtep.pid \ --ovnsb-db=${OVN_DB} --vtep-db=${VTEP_DB} ++++++ ovn-controller.service ++++++ # # You may override the following variables to customize ovn-controller behavior: # # OVS_DB - Set this variable to the location of the ovsdb server that is # serving the Open_vSwitch database for the local ovs-vswitchd. # See the manpage for ovn-controller for more details on the # format for the db location. # [Unit] Description=OVN controller daemon After=syslog.target Requires=openvswitch.service After=openvswitch.service [Service] Type=simple Environment=OVS_RUNDIR=%t/openvswitch Environment=OVS_DB=unix:%t/openvswitch/db.sock ExecStart=/usr/bin/ovn-controller -vconsole:emer -vsyslog:err -vfile:info \ --log-file=/var/log/openvswitch/ovn-controller.log \ --no-chdir --pidfile=${OVS_RUNDIR}/ovn-controller.pid ${OVS_DB} ++++++ ovn-northd.service ++++++ [Unit] Description=OVN northd management daemon After=syslog.target Requires=openvswitch.service After=openvswitch.service [Service] Type=oneshot RemainAfterExit=yes Environment=OVS_RUNDIR=%t/openvswitch OVS_DBDIR=/var/lib/openvswitch ExecStart=/usr/share/openvswitch/scripts/ovn-ctl start_northd ExecStop=/usr/share/openvswitch/scripts/ovn-ctl stop_northd
