Hello community, here is the log from the commit of package sdparm for openSUSE:Factory checked in at 2016-09-05 21:11:32 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/sdparm (Old) and /work/SRC/openSUSE:Factory/.sdparm.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "sdparm" Changes: -------- --- /work/SRC/openSUSE:Factory/sdparm/sdparm.changes 2014-12-31 11:21:59.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.sdparm.new/sdparm.changes 2016-09-05 21:11:34.000000000 +0200 @@ -1,0 +2,33 @@ +Wed Aug 24 17:49:33 UTC 2016 - alexander_nau...@opensuse.org + +- Update to version 1.10 + * add --inhex=FN option for decoding without device present, + FN is interpreted as response to mode sense(10) command + * add --raw option to interpret FN as binary (def: ASCII hex) + * add --pdt=PDT option for use with --inhex=FN + * --quiet used twice hides changeable, default + saved + * add IO advice hints grouping mode page (sbc4r06, 8) + * add Unit serial number VPD page specific sanity check + * add NO_PI_CHK to Supported block lengths and protection + types VPD page + * add Background operation control mpage (sbc4r07) + * Read-write error recovery mpage: add Misaligned writes + reporting field (MWR) + * sync tape mpages with ssc5r02 + * add Block limits extension VPD page + * add Device constituents VPD page + * add LB protection VPD page (ssc5r02a) + * LB provisioning VPD page: expand LBPRZ, add Minimum and + Threshold percentage fields + * device identification VPD page: add decoding for locally + assigned UUIDs (spc5r08) + * the --inhex=FN option together with --inquiry decodes + FN as a single VPD page + * improve lto5 and lto6 vendor mpage support + * sync to spc5r08 and sbc4r10 + * add SAS G5 (22.5 Gbps) settings (spl4r06) + * point svn:externals to rev 663 of sg3_utils + * upgrade automake to version 1.15 (U15.10) + * autogen.sh: upgrade to buildconf 20091223 version + +------------------------------------------------------------------- Old: ---- sdparm-1.09.tar.xz New: ---- sdparm-1.10.tar.xz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ sdparm.spec ++++++ --- /var/tmp/diff_new_pack.MdJi6x/_old 2016-09-05 21:11:35.000000000 +0200 +++ /var/tmp/diff_new_pack.MdJi6x/_new 2016-09-05 21:11:35.000000000 +0200 @@ -1,7 +1,7 @@ # # spec file for package sdparm # -# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2016 SUSE LINUX GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,7 +17,7 @@ Name: sdparm -Version: 1.09 +Version: 1.10 Release: 0 Summary: List or change SCSI disk parameters License: BSD-3-Clause ++++++ sdparm-1.09.tar.xz -> sdparm-1.10.tar.xz ++++++ ++++ 12632 lines of diff (skipped)