Hello community,
here is the log from the commit of package raspberrypi-firmware for
openSUSE:Factory checked in at 2016-09-13 22:24:30
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/raspberrypi-firmware (Old)
and /work/SRC/openSUSE:Factory/.raspberrypi-firmware.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "raspberrypi-firmware"
Changes:
--------
---
/work/SRC/openSUSE:Factory/raspberrypi-firmware/raspberrypi-firmware-config-rpi.changes
2016-09-05 21:24:40.000000000 +0200
+++
/work/SRC/openSUSE:Factory/.raspberrypi-firmware.new/raspberrypi-firmware-config-rpi.changes
2016-09-13 22:25:15.000000000 +0200
@@ -1,0 +2,15 @@
+Mon Sep 12 13:30:41 UTC 2016 - [email protected]
+
+- Clean up config-{rpi2,rpi3}.txt, dropping rpi1 defaults
+* On the rpi1 Model B rev. 2 performance results are similar
+ with and without defaults, so in doubt leave our settings in
+ config-rpi.txt until proven the defaults work better somewhere.
+
+-------------------------------------------------------------------
+Tue Sep 6 08:33:28 UTC 2016 - [email protected]
+
+- Use default frequencies in config-rpi{2,3}.txt (bsc#989511)
+* Defaults work well on rpi2
+* Allow much higher frequencies on rpi3
+
+-------------------------------------------------------------------
raspberrypi-firmware-config-rpi2.changes: same change
raspberrypi-firmware-config-rpi3.changes: same change
raspberrypi-firmware.changes: same change
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
raspberrypi-firmware-config-rpi2.spec: same change
raspberrypi-firmware-config-rpi3.spec: same change
raspberrypi-firmware.spec: same change
++++++ config-rpi2.txt ++++++
--- /var/tmp/diff_new_pack.9eTvTz/_old 2016-09-13 22:25:17.000000000 +0200
+++ /var/tmp/diff_new_pack.9eTvTz/_new 2016-09-13 22:25:17.000000000 +0200
@@ -12,12 +12,6 @@
force_turbo=0
# Start in turbo mode for 30 seconds or until cpufreq sets a frequency
initial_turbo=30
-# Max ARM freq (default 700 MHz)
-arm_freq=840
-# Max core (GPU) freq (default 250 MHz)
-core_freq=375
-# SDRAM freq (default 400)
-sdram_freq=400
# DO NOT overvoltage manually to not void warranty!
over_voltage=0
++++++ config-rpi3.txt ++++++
--- /var/tmp/diff_new_pack.9eTvTz/_old 2016-09-13 22:25:17.000000000 +0200
+++ /var/tmp/diff_new_pack.9eTvTz/_new 2016-09-13 22:25:17.000000000 +0200
@@ -12,12 +12,6 @@
force_turbo=0
# Start in turbo mode for 30 seconds or until cpufreq sets a frequency
initial_turbo=30
-# Max ARM freq (default 700 MHz)
-arm_freq=840
-# Max core (GPU) freq (default 250 MHz)
-core_freq=375
-# SDRAM freq (default 400)
-sdram_freq=400
# DO NOT overvoltage manually to not void warranty!
over_voltage=0
# Boot in AArch64 (64-bit) mode
