Not sure if this is a bug, I thought it worth a punt here before logging as one:
Fresh install of 10.1 RC1 on elderly AMD K6-2/500 but with plenty of RAM (512M) and hard disc (40G). Previously running SuSE 9.3 with no problems at all. Install of RC1 completed OK though with already-reported failures e.g. of yast update, fixed using the new rpms. Sound card is Creative / Ensonic PCI-128, correctly identified by installer - this is from hwinfo --sound: 15: PCI 0b.0: 0401 Multimedia audio controller [...] Model: "Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128" Vendor: pci 0x1274 "Ensoniq" Device: pci 0x1371 "ES1371 [AudioPCI-97]" [...] Config Status: cfg=no, avail=yes, need=no, active=unknown However, when I try to configure using Yast, it always fails with lines like the following in y2log: [...] 2006-04-19 20:26:56 <3> beige(27813) [bash] ShellCommand.cc(shellcommand):78 Cannot stat /dev/dsp*: No such file or directory [...] 2006-04-19 20:27:01 <1> beige(27813) [YCP] sound/routines.ycp:619 modname: snd-ens1371 2006-04-19 20:27:01 <1> beige(27813) [YCP] sound/routines.ycp:620 mod_name: snd_ens1371 2006-04-19 20:27:01 <1> beige(27813) [YCP] sound/routines.ycp:621 get_running_cards: [] 2006-04-19 20:27:01 <1> beige(27813) [YCP] sound/routines.ycp:622 card_id: 0 2006-04-19 20:27:01 <1> beige(27813) [YCP] sound/routines.ycp:623 /proc cards: --- no soundcards --- 2006-04-19 20:27:01 <1> beige(27813) [YCP] sound/volume.ycp:307 starting extra attempt: 0 [...] 2006-04-19 20:27:02 <1> beige(27813) [YCP] sound/volume.ycp:313 result of the extra attempt: The kernel module snd-ens1371 for sound support could not be loaded. This can be caused by incorrect module parameters, including invalid IO or IRQ parameters. Attempting to install with alsaconf seems to work but also results in no card being found. Has anyone any idea what's wrong here? I have to say generally that 10.1 is looking pretty good, though there are clearly a few issues still to fix. Regards, -- Richard mailto:[EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
