Hi,
I'm trying to get running just a simple WLAN-connection with SL 10.1 RC2
(and older) but I have no success :-(
Hardware is an IBM ThinkPad T22 and installation is a Gnome-system.
First I tried two D-Link-Cardbus-Cards (DWL-G650, DWL-AG660) which are
not recognized at all (possibly you're able to get them running with
ndiswrapper or whatever, but it should run mostly out of the box with SL
10.1).
Then I tried a SMC 2835W (Part-No. 99-012084-295) that looks quite good,
the card is recognized, I can set my encryption and after putting the
firmware into the correct directory (/lib/firmware/isl3890) it seems to
work (Link-LED is on, ACT-LED sometimes).
But I don't get an ip-connection, I tried it on two accesspoints (both
FritzBox Phon/WLAN but with different configurations), without security,
with WEP and with WPA-PSK but it's not working.
The log tells me the following:
--------------------------------------------------
Apr 28 22:14:21 lx-pc-gg kernel: pccard: CardBus card inserted into slot 0
Apr 28 22:14:21 lx-pc-gg syslog-ng[2288]: Changing permissions on
special file /dev/xconsole
Apr 28 22:14:21 lx-pc-gg syslog-ng[2288]: Changing permissions on
special file /dev/tty10
Apr 28 22:14:21 lx-pc-gg kernel: PCI: Enabling device 0000:02:00.0 (0000
-> 0002)
Apr 28 22:14:21 lx-pc-gg kernel: ACPI: PCI Interrupt 0000:02:00.0[A] ->
Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Apr 28 22:14:21 lx-pc-gg kernel: eth1: resetting device...
Apr 28 22:14:21 lx-pc-gg kernel: eth1: uploading firmware...
Apr 28 22:14:21 lx-pc-gg kernel: eth1: firmware version: 1.0.4.3
Apr 28 22:14:21 lx-pc-gg kernel: eth1: firmware upload complete
Apr 28 22:14:22 lx-pc-gg kernel: eth1: interface reset complete
Apr 28 22:14:22 lx-pc-gg kernel: eth1: islpci_close ()
Apr 28 22:14:22 lx-pc-gg ifup: Network interface is managed from
NetworkManager
Apr 28 22:14:22 lx-pc-gg ifup: NetworkManager will be advised to set up eth1
Apr 28 22:14:22 lx-pc-gg ifup: but it cannot be assured from here.
Apr 28 22:14:22 lx-pc-gg kernel: eth1: resetting device...
Apr 28 22:14:22 lx-pc-gg kernel: eth1: uploading firmware...
Apr 28 22:14:22 lx-pc-gg kernel: eth1: firmware version: 1.0.4.3
Apr 28 22:14:22 lx-pc-gg kernel: eth1: firmware upload complete
Apr 28 22:14:22 lx-pc-gg kernel: eth1: interface reset complete
Apr 28 22:14:43 lx-pc-gg kernel: eth1: timeout waiting for mgmt response
250, triggering device
...
--------------------------------------------------
Then I tried a Belkin 802.11b F5D6020 ver. 2 and an ARtem Onair ComCard
11, but they are not working too, log-file for both PC-Cards:
--------------------------------------------------
Apr 28 22:33:28 lx-pc-gg kernel: pccard: PCMCIA card inserted into slot 0
Apr 28 22:33:28 lx-pc-gg kernel: cs: memory probe 0xa0000000-0xa0ffffff:
excluding 0xa0000000-0xa00fffff
Apr 28 22:33:28 lx-pc-gg kernel: pcmcia: registering new device pcmcia0.0
Apr 28 22:33:29 lx-pc-gg kernel: eth1: Atmel at76c50x. Version 0.98. MAC
00:30:bd:d3:4e:af
Apr 28 22:33:29 lx-pc-gg kernel: eth1 renamed to eth2
Apr 28 22:33:29 lx-pc-gg ifup: Network interface is managed from
NetworkManager
Apr 28 22:33:29 lx-pc-gg ifup: NetworkManager will be advised to set up eth2
Apr 28 22:33:29 lx-pc-gg ifup: but it cannot be assured from here.
Apr 28 22:33:29 lx-pc-gg kernel: ADDRCONF(NETDEV_UP): eth2: link is not
ready
--------------------------------------------------
Apr 28 22:33:28 lx-pc-gg kernel: pccard: PCMCIA card inserted into slot 0
Apr 28 22:33:28 lx-pc-gg kernel: cs: memory probe 0xa0000000-0xa0ffffff:
excluding 0xa0000000-0xa00fffff
Apr 28 22:33:28 lx-pc-gg kernel: pcmcia: registering new device pcmcia0.0
Apr 28 22:33:29 lx-pc-gg kernel: eth1: Atmel at76c50x. Version 0.98. MAC
00:30:bd:d3:4e:af
Apr 28 22:33:29 lx-pc-gg kernel: eth1 renamed to eth2
Apr 28 22:33:29 lx-pc-gg ifup: Network interface is managed from
NetworkManager
Apr 28 22:33:29 lx-pc-gg ifup: NetworkManager will be advised to set up eth2
Apr 28 22:33:29 lx-pc-gg ifup: but it cannot be assured from here.
Apr 28 22:33:29 lx-pc-gg kernel: ADDRCONF(NETDEV_UP): eth2: link is not
ready
Apr 28 22:36:00 lx-pc-gg kernel: pccard: card ejected from slot 0
Apr 28 22:36:00 lx-pc-gg ifdown: Network interface is managed from
NetworkManager
Apr 28 22:36:00 lx-pc-gg ifdown: NetworkManager cannot be advised to
take down an interface.
Apr 28 22:36:00 lx-pc-gg ifdown: Set up another interface instead.
Apr 28 22:36:10 lx-pc-gg kernel: pccard: PCMCIA card inserted into slot 0
Apr 28 22:36:10 lx-pc-gg kernel: pcmcia: registering new device pcmcia0.0
Apr 28 22:36:10 lx-pc-gg kernel: orinoco 0.15rc3 (David Gibson
<[EMAIL PROTECTED]>, Pavel Roskin <[EMAIL PROTECTED]>, et al)
Apr 28 22:36:10 lx-pc-gg kernel: orinoco_cs 0.15rc3 (David Gibson
<[EMAIL PROTECTED]>, Pavel Roskin <[EMAIL PROTECTED]>, et al)
Apr 28 22:36:10 lx-pc-gg kernel: eth1: Hardware identity 0001:0001:0004:0002
Apr 28 22:36:10 lx-pc-gg kernel: eth1: Station identity 001f:0001:0008:000a
Apr 28 22:36:10 lx-pc-gg kernel: eth1: Firmware determined as
Lucent/Agere 8.10
Apr 28 22:36:10 lx-pc-gg kernel: eth1: Ad-hoc demo mode supported
Apr 28 22:36:10 lx-pc-gg kernel: eth1: IEEE standard IBSS ad-hoc mode
supported
Apr 28 22:36:10 lx-pc-gg kernel: eth1: WEP supported, 104-bit key
Apr 28 22:36:10 lx-pc-gg kernel: eth1: MAC address 00:02:2D:2E:1F:D2
Apr 28 22:36:10 lx-pc-gg kernel: eth1: Station name "HERMES I"
Apr 28 22:36:10 lx-pc-gg kernel: eth1: ready
Apr 28 22:36:10 lx-pc-gg kernel: eth1: index 0x01: Vcc 5.0, irq 4, io
0x0100-0x013f
Apr 28 22:36:10 lx-pc-gg kernel: eth1 renamed to eth3
Apr 28 22:36:10 lx-pc-gg ifup: Network interface is managed from
NetworkManager
Apr 28 22:36:10 lx-pc-gg ifup: NetworkManager will be advised to set up eth3
Apr 28 22:36:10 lx-pc-gg ifup: but it cannot be assured from here.
Apr 28 22:36:11 lx-pc-gg kernel: ADDRCONF(NETDEV_UP): eth3: link is not
ready
--------------------------------------------------
Any ideas? Thanks a lot,
--
Chau y hasta luego,
Thorolf
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
