On Mon, Sep 11, 2006 at 06:58:40PM -0300, Juan Erbes wrote: > 2006/9/11, Marcus Meissner <[EMAIL PROTECTED]>: > >On Mon, Sep 11, 2006 at 06:16:12PM -0300, Juan Erbes wrote: > >> 2006/9/11, Marcus Meissner <[EMAIL PROTECTED]>: > >> >On Mon, Sep 11, 2006 at 01:50:56PM -0300, Juan Erbes wrote: > >> >> Many weeks ago, upgrading with smart, it replaced mDNSResponder with > >> >> avahi-compat-mDNSResponder, and then, Digikam has hanged, any time I > >> >> would to connect the cam. Then I installed mDNSResponder with smart, > >> >> and it has removed avahi-compat-mDNSResponder, and digikam worked ok. > >> >> With the two last updates (the last was not complete), Digicam can't > >> >> connec to the camera, but now I mean that is a permission problem, > >> >> derived from PolicyKit, because the permissions are set only to root > >> >> in the usb devices. > >> > > >> >digikam will also likely crash when using avahi-compat-mDNSResponder > >> >and camera autodetect. > >> > > >> > >> I have'nt installed avahi-compat-mDNSResponder. > >> The message from dmesg is: > >> > >> usb 5-1: new full speed USB device using uhci_hcd and address 2 > >> usb 5-1: new device found, idVendor=04a9, idProduct=3055 > >> usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=0 > >> usb 5-1: Product: PowerShot G2 > >> usb 5-1: Manufacturer: Canon Inc. > >> usb 5-1: configuration #1 chosen from 1 choice > >> > >> I do'nt know waht is "configuration #1 chosen from 1 choice" > >> > >> About permission (the last connection): > >> ls -l /dev/bus/usb/005/005 > >> crw-rw-r--+ 1 root root 189, 516 2006-09-11 18:11 /dev/bus/usb/005/005 > > > >Looks good. Please run: > > getfacl /dev/bus/usb/005/005 > > > >> With the introduction of udev in version 10.1, I got similar problems, > >> and the problems was with wrong permissions in this oportunity. I mean > >> the problem is now the same, and derived from PolicyKit. > > > > I got: > getfacl /dev/bus/usb/005/008 > getfacl: Removing leading '/' from absolute path names > # file: dev/bus/usb/005/008 > # owner: root > # group: root > user::rw- > user:jerbes:rw- > group::r-- > mask::rw- > other::r-- > > /dev/bus/usb/005/008 was obtained via udevmonitor. > > I have debugged digikam with ddd/gdb, and obtained: > digikam: symbol lookup error: /usr/lib/libgphoto2_port/0.6.0/disk.so: > undefined symbol: dbus_connection_disconnect
Yes, this is yet another Alpha bug... I fixed it in Factory. Ciao, Marcus --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
