On Wed, 13 Sep 2006, Terje J. Hanssen wrote: > My Viewsonic VP191b LCD manages [EMAIL PROTECTED] Checking with the F key on > the first SUSE installation screen shows that the correct 1280x1024 > resolution is set. But if I continue with this, soon after the monitor > runs "Out of Range" and one have to start from scratch again. The reason > I've found out is that the frequences is set too high, 85 Hz which my
It is in fact 43Hz interlaced and it's that interlaced bit that modern monitors apparently don't like. And unfortunatele it _IS NOT POSSIBLE_ (*) to select the frequency. You don't even know in advance what timing the graphics card is going to use. That said, I've only had reports about this for ATI cards. And for them there is a workaround 10.2. Steffen *) Actually VBE 3.0 lets you, but only NVidia seems to go for it. But Nvidia boards don't have that problem, so there's not really a point. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
