On Sun, 4 Mar 2007, Sid Boyce <[EMAIL PROTECTED]> wrote:-
<snip>
>Have a look at audacity as a starting point to experiment with. The MIC
>plug is stereo, but I don't know if the INPUT line on any sound card is
>stereo.
They should be. I have yet to have a single sound card where the line
input was anything but stereo.
The way I would do this would be to use a couple of phono leads from the
HIFI line-out. Plug these into a phono-to-stereo 1/8" adapter, which is
then plugged into the line-in on the sound card.
Once the physical connections are made, make a test sampling with
Audacity to make sure everything's correct. Finally, either sample the
whole LP in one go and then copy each track from the big sample, or just
sample one track at a time.
I'd probably sample a track at a time, until I was sure everything was
fine. After that, if I was doing multiple LPs, I'd sample the whole LP
and extract the tracks from that.
Regards,
David Bolt
--
Member of Team Acorn checking nodes at 50 Mnodes/s: http://www.distributed.net/
RISCOS 3.11 | SUSE 10.0 32bit | SUSE 10.0 64bit | openSUSE 10.2 32bit
RISCOS 3.6 | SUSE 10.1 32bit | SUSE 10.1 64bit | openSUSE 10.2 64bit
TOS 4.02 | SUSE 9.3 32bit | | openSUSE 10.3a1 32bit
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
