same here,
but sometimes when i do *something* e.g run yast2 bootloader, it
automounts the cd what was in the drive and appeared /dev/sr0 and sr1
i cant find usefull message in dmesg for this
dunno if this is related or not:
bootsplash: status on console 0 changed to on
WARNING: at mm/slab.c:777 __find_general_cachep()
[<c0168087>] __kmalloc+0x40/0xb4
[<e1a124b0>] os_alloc_mem+0x5f/0xa4 [nvidia]
[<e178bc62>] _nv002768rm+0x16/0x2c [nvidia]
[<e17719c6>] _nv002011rm+0x202/0x384 [nvidia]
[<e17940e4>] rm_set_interrupts+0x140/0x158 [nvidia]
[<e176aee9>] _nv003626rm+0x81/0xb8 [nvidia]
[<e17967ad>] _nv001996rm+0x3d/0x770 [nvidia]
[<e1796ab3>] _nv001996rm+0x343/0x770 [nvidia]
[<e17943cc>] rm_ioctl+0x1c/0x24 [nvidia]
[<c01cbad9>] copy_from_user+0x23/0x4f
[<e1a0f533>] nv_kern_ioctl+0x2f0/0x361 [nvidia]
[<e1a0f5d9>] nv_kern_unlocked_ioctl+0x18/0x1d [nvidia]
[<e1a0f5c1>] nv_kern_unlocked_ioctl+0x0/0x1d [nvidia]
[<c017510d>] do_ioctl+0x21/0xa0
[<c0179d9d>] dput+0x21/0xe8
[<c016bbe9>] __fput+0x13e/0x168
[<c0384641>] kernel_param_sysfs_setup+0xc/0x7f
[<c01753c3>] vfs_ioctl+0x237/0x249
[<c017d4ca>] mntput_no_expire+0x11/0x6a
[<c0175421>] sys_ioctl+0x4c/0x67
[<c0104cf6>] sysenter_past_esp+0x5f/0x89
[<c0384641>] kernel_param_sysfs_setup+0xc/0x7f
=======================
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata1.00: (BMDMA stat 0x64)
ata1.00: cmd ca/00:00:21:a5:cb/00:00:00:00:00/e3 tag 0 cdb 0x0 data 131072 out
res 51/84:80:a1:a5:cb/00:00:00:00:00/e3 Emask 0x10 (ATA bus error)
ata1: soft resetting port
ata1.01: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
ata1.00: ata_hpa_resize 1: sectors = 80293248, hpa_sectors = 80293248
ata1.00: ata_hpa_resize 1: sectors = 80293248, hpa_sectors = 80293248
ata1.00: configured for UDMA/133
ata1.01: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
ata1.01: configured for UDMA/100
ata1: EH complete
BTW: i've installed the GNOME 1CD
On 6/16/07, Bjørn Bendix <[EMAIL PROTECTED]> wrote:
Hello,
> I installed Alpha5 on my T40 Thinkpad and k3b doesn't see my CD/DVD device.
>
> I get the following message when I open "No CD/DVD writer found" when I
> open k3b
>
> I have a similar problem in that yast didn't "see" the installation media
> DVD when I tried to install more packages from the installation media DVD.
> (The same installation DVD that I used to install Alpha5 on my T40.
>
> I also installed Alpha5 under VMware on 10.2 and I noticed the same problem
> e.g. k3b doesn't see my CD/DVD device.
>
> Can anyone else confirm or deny that their CD/DVD device works fine on
> Alpha5 and that they can burn CD's?
>
Yes i can confim this. On my Sony Vaio S5 i have the same problem.
Bye
Bjørn
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
N�����r��y隊Z)z{.���r�+�맲��r��z�^�ˬz����uح��ڕ�&��ݱ隊Z)z{.���r�+��^��)z{.�
