After upgrade to 10.3 alpha 6, Kinternet not completes a dialup the connection. I downgraded to previous versions the packages ppp, smppp and kinternet, and the problem continues. I configured wvdial, and it works fine.
The log of wvdial is: CONNECT 50666/ARQ/V90/LAPM/V42BIS --> Carrier detected. Waiting for prompt. [EMAIL PROTECTED] }9}"}&} }*} } }#}%B#}%}%}&Rp,};}'}"}(}"p:~ --> PPP negotiation detected. --> Starting pppd at Mon Jul 23 08:51:25 2007 --> Pid of pppd: 4969 --> Using interface ppp0 --> pppd: h����[12][06][08] --> pppd: h����[12][06][08] --> pppd: h����[12][06][08] --> pppd: h����[12][06][08] --> pppd: h����[12][06][08] --> pppd: h����[12][06][08] --> local IP address 200.68.236.83 --> pppd: h����[12][06][08] --> remote IP address 200.68.236.254 --> pppd: h����[12][06][08] --> primary DNS address 200.49.192.41 --> pppd: h����[12][06][08] --> secondary DNS address 200.49.207.41 --> pppd: h����[12][06][08] --> Script /etc/ppp/ip-up run successful --> Default route Ok. --> Nameserver (DNS) Ok. --> Connected... Press Ctrl-C to disconnect --> pppd: h����[12][06][08] The log of kinternet is: pppd[0]: CONNECT 50666/ARQ/V90/LAPM/V42BIS pppd[0]: --> Carrier detected. Waiting for prompt. pppd[0]: ** Bienvenidos a Belgrano 2** pppd[0]: Usuario: pppd[0]: --> Looks like a login prompt. pppd[0]: --> Sending: emp/jerbes pppd[0]: emp/jerbes pppd[0]: Password: pppd[0]: --> Looks like a password prompt. pppd[0]: --> Sending: (password) pppd[0]: Entering PPP Session. pppd[0]: IP address is 200.45.208.111 pppd[0]: MTU is 1524. pppd[0]: --> Looks like a welcome message. pppd[0]: --> Starting pppd at Mon Jul 23 09:14:58 2007 pppd[0]: --> Pid of pppd: 6443 Kinternet, do'nt continues at this point, and later the connection was closed. Thanks
