2007/9/22, Richard (MQ) <[EMAIL PROTECTED]>: > Juan Erbes wrote: > > 2007/9/22, Richard (MQ) <[EMAIL PROTECTED]>: > >> Trying to do a 'new installation' of 10.3 RC1 on my primary test > >> machine, for these tests I use a second 10GB HD sdb (first HD sda has > >> 10.2 and 'another' OS on it). > >> > >> First time round, installer complained it couldn't read partition table > >> (which was created a few weeks ago by a 10.3 Beta installation) - > >> attempting to select manually using 'expert partitioning' YaST informed > >> me it was only 4.3GB > >> > >> Exit & re-boot, BIOS also says 4.3G! so power off and on again and it's > >> back to 10G (which is what it IS). > >> > > > > If the bios stated 4.3G, then You has a hardware problem, not a > > software problem! > > > > And if the HD is of only 10 GB, it's a little old and probably at the > > end of his days. > > I take your point, but this disc has been used for this same purpose for > about a year (some alpha and all beta & gold OpenSuSE releases) without > showing anything like this. I've never seen anything similar before... > > I will try a different disc and report back to this thread before > raising a bug. > --
Verify that the problem not resides in the mobo or chipset. I forgot this detail. What chipset has You mobo? regards --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
