Jun Hu wrote:
> Hi Guys:
>
> I found an issue that xen vm can't autoboot because of  bridge hasn't
> set up,  i can manually boot  the vm .
>
> maybe a bug?

Seems the xendomains script should require the network to be active. 
Does adding '$network' to 'Required-Start' and 'Required-Stop' help?

Regards,
Jim

>   
>
> junwork:/etc/libvirt/qemu # chkconfig -A --list | grep xen
>
> Note: This output shows SysV services only and does not include native
> systemd services. SysV configuration data might be overridden by native
> systemd configuration.
>
> xen-watchdog              0:off  1:off  2:off  3:off  4:off  5:off
> 6:off
> xencommons                0:off  1:off  2:on   3:on   4:off  5:on
> 6:off
> xend                      0:off  1:off  2:off  3:on   4:off  5:on
> 6:off
> xendomains                0:off  1:off  2:off  3:on   4:off  5:on
> 6:off
>
>
> junwork:~ # rcxend status
> redirecting to systemctl
> xend.service - LSB: Starts and stops the Xen management daemon
>         Loaded: loaded (/etc/init.d/xend)
>         Active: active (running) since Fri, 04 Jan 2013 06:41:11 +0800; 1h
> 14min ago
>        Process: 659 ExecStart=/etc/init.d/xend start (code=exited,
> status=0/SUCCESS)
>         CGroup: name=systemd:/system/xend.service
>                 ├ 737 /usr/bin/python /usr/sbin/xend start
>                 ├ 738 blktapctrl
>                 └ 740 /usr/bin/python /usr/sbin/xend start
>
> Jan 04 06:41:11 junwork xend[659]: Starting xend ..done
>
>
> junwork:/etc/libvirt/qemu # rcxendomains status
> redirecting to systemctl
> xendomains.service - LSB: Starts and stops Xen VMs
>         Loaded: loaded (/etc/init.d/xendomains)
>         Active: failed (Result: exit-code) since Fri, 04 Jan 2013 06:41:31
> +0800; 1h 20min ago
>        Process: 1323 ExecStart=/etc/init.d/xendomains start (code=exited,
> status=1/FAILURE)
>         CGroup: name=systemd:/system/xendomains.service
>
> Jan 04 06:41:11 junwork xendomains[1323]: Restoring saved Xen domains
> Jan 04 06:41:29 junwork xendomains[1323]: windowsxp: ..failed
> Jan 04 06:41:29 junwork xendomains[1323]: Starting auto Xen domains
> Jan 04 06:41:31 junwork xendomains[1323]: config_winxp: Error: Device 0
> (vif) could not be connected. Could not find ...ce br0
> Jan 04 06:41:31 junwork xendomains[1323]: ..failed
>
> junwork:/etc/libvirt/qemu # ifconfig
> br0       Link encap:Ethernet  HWaddr 00:1F:16:25:AA:66  
>           inet addr:192.168.5.20  Bcast:192.168.5.255
> Mask:255.255.255.0
>           UP BROADCAST MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0 
>           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
>
> eth0      Link encap:Ethernet  HWaddr 00:1F:16:25:AA:66  
>           UP BROADCAST MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000 
>           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
>           Interrupt:20 Memory:f2600000-f2620000 
>
> lo        Link encap:Local Loopback  
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:10 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0 
>           RX bytes:1212 (1.1 Kb)  TX bytes:1212 (1.1 Kb)
>
> wlan0     Link encap:Ethernet  HWaddr 00:1E:65:6E:90:AE  
>           inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
>           inet6 addr: fe80::21e:65ff:fe6e:90ae/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:6695 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:5897 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000 
>           RX bytes:3861362 (3.6 Mb)  TX bytes:1266239 (1.2 Mb)
>
>
>
> junwork:/etc/xen/auto # cat config_winxp
> name="windowsxp"
> description="ip_192.168.10.55"
> uuid="d090b5fe-c5e2-e8fd-6720-a49d5debb94c"
> memory=512
> maxmem=512
> vcpus=2
> on_poweroff="destroy"
> on_reboot="restart"
> on_crash="destroy"
> localtime=1
> keymap="en-us"
>
> builder="hvm"
> device_model="/usr/lib/xen/bin/qemu-dm"
> kernel="/usr/lib/xen/boot/hvmloader"
> boot="c"
> disk=[ 
> 'file:/xendisk/xen_vms/winxp/winxp.img,hda,w',
>
>  ]
> vif=[ 'mac=00:16:3e:63:af:b9,bridge=br0,model=rtl8139',
> #     'mac=00:16:3e:13:63:2b,bridge=br1,model=rtl8139',
>  ]
> ##ip=192.168.5.221
>
> stdvga=0
> vnc=1
> vncunused=1
> extid=0
> usb=1
> acpi=1
> pae=1
>
> usbdevice='tablet'
>
> serial="pty"
>
>
>
>   
-- 
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]

Reply via email to