On Wed, Oct 26, 2005 at 08:33:01AM +1000, Steven Lamb wrote: > Marcus Meissner wrote: > > >On Tue, Oct 25, 2005 at 09:24:14AM +1000, Steven Lamb wrote: > > > > > >>Hi, > >>I have installed Suse 10.0 on my toshiba A70 laptop but I noticed that > >>the camera is not being detected via the USB2 port. I have other devices > >>which are being detected fine via USB2. > >> > >> > > > >Is it detected on the USB 1 port (if you have any)? > > > >What is the "cat /proc/bus/usb/devices" output with the camera attached? > > > >Can you switch the camera mode between Normal and PTP (to PTP if possible). > > > >Ciao, Marcus > > > > > Below is the output of the cat. I tried PTP and Normal mode on all USB > ports but the camera was still not detected. I tried another USB device > and this worked without a problem.
> T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 > P: Vendor=04a9 ProdID=30eb Rev= 0.01 > S: Manufacturer=Canon Inc. > S: Product=Canon Digital Camera > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=64ms This is the camera in normal mode. The 20D currently will only work in PTP mode... gphoto2 --list-cameras|grep EOS should like the EOS 20D (PTP mode). Ciao, Marcus --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
