Danny Kukawka schrieb:
On Thursday 10 November 2005 01:18, CPHennessy wrote:
Hi,
I've a laptop with a SD card reader, which when I use "lspci" I can see
is a 06:09.0 Cardbus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
When I insert an SD card it is not mounted automatically. Should it be ?
How can I mount it manually ?
Unknown. Please attach the output of lshal.
Danny
Hi Danny,
I have the same problem. All PCMCIA cards don't work.
Here the ouput vom lshal:
udi = '/org/freedesktop/Hal/devices/pci_1180_476'
info.udi = '/org/freedesktop/Hal/devices/pci_1180_476' (string)
linux.subsystem = 'pci' (string)
linux.hotplug_type = 1 (0x1) (int)
pci.subsys_product = 'Unknown (0x1177)' (string)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
info.product = 'RL5c476 II' (string)
pci.product = 'RL5c476 II' (string)
info.vendor = 'Ricoh Co Ltd' (string)
pci.vendor = 'Ricoh Co Ltd' (string)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 7 (0x7) (int)
pci.device_class = 6 (0x6) (int)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.subsys_product_id = 4471 (0x1177) (int)
pci.vendor_id = 4480 (0x1180) (int)
pci.product_id = 1142 (0x476) (int)
info.linux.driver = 'yenta_cardbus' (string)
pci.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1e.0/0000:01:01.0' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.bus = 'pci' (string)
linux.sysfs_path_device =
'/sys/devices/pci0000:00/0000:00:1e.0/0000:01:01.0' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1e.0/0000:01:01.0' (string)
Thanks Albert
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
