On Thu, 2005-11-17 at 07:26 +0100, Dominique Leuenberger wrote: > John Rittinghouse wrote: > > Hi list, > > > > I just moved from Linspire to Suse 10 and like the transition very > > much. Everything works pretty well from the install but I cannot seem > > to get the WLAN to work. I can hit the Access point from any other > > machine and get to the Internet fine, but with Suse, I can hit the > > config screen on the Access Point and configure, etc. but still cannot > > get out to the Internet. The card is configured correctly using > > 64-bit WEP and it is recognized by the kwifimanager program with an > > excellent signal and a valid IP address assigned with DHCP from the > > AP. I must be overlooking something but am baffled at this point. > > Can someone shed some light on why I cannot get out to the internet? > > Many thanks in advance. > > > Hi John, > > Jave you checked if DNS name resolution works correct? > Are there valid DNS servers in your /etc/resolv.conf? > You receive them by DHCP? > Try to connect to something like http://212.203.69.7 (so no dns is required) > > I guess on such a failure as you say you can access the web interface of > your AP (probably using it's IP) so it might be such a cause... in other > cases I would try to check the routing table using 'route print' > This is not windows. Use route -n.
-- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998 --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
