On Sat, 2006-01-14 at 18:10 -0500, BandiPat wrote:
> On Saturday 14 January 2006 17:17, M.Blackmore wrote:
> > Total lock up with two different nvidia cards (fx5500, followed by
> > 5200), won't install graphics on installation of Suse 10 (Linux
> > Magazine UK version DVD - good on Linux Mag!!).
> >
I've had mixed success so far.

The systems also got a matrox millenium pci card for a second display,
which I have had in and out of the box, and played with pic slot irq
assignations etc.
> > ---------------------------------------------------------------------
> Have you tried removing the Matrox card to see if things begin to work 
> normally?

Nope, doing that didn't work initially using sax2/yast tools - lockup. 

I did, however, set up a basic nvidia generic driver using xf86config,
and that seemed to enable something enough to run sax2, and I was then
able to set up the nvidia card and monitor using the pointyklikky tools
that lusers like me like... however, no second card with this.

>   You might also check your /var/log/messages file or the 
> Xorg.0.log for errors/help in what's happening.

Had a look at those but didn't mean anything to me - a reflection of my
ignorance. But didn't seem to be anything saying "failed" or whatever.
System just hangs on running sax2.

>   Are you saying the 
> setup doesn't work with either the SuSE supplied nv driver or nVidia's 
> driver?
> 
Yes, problem was with both.

OK, now if I was able to, with both the matrox card in and out of the
system, do something with xf86config that enabled sax2 to run, how can I
set up the second PCI slot card as well using the same method - it might
work??

Sax2 isn't recognising the existence of the second card now that I've
taken it out. I did have a system running with both cards recognised but
the monitor settings were all wrong and I couldn't run the yast control
panel to change them without locking the system.

At least I can get a single monitor system running, which is an
improvement. I like GUIs - as thick as two short planks when it comes to
command lines...

Yours in bafflement

---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Reply via email to