What I am using right now is a WinTV GO-Plus, if that makes any difference. houghi wrote: > On Sat, Nov 11, 2006 at 01:46:11PM -0900, John Andersen wrote: >> On Saturday 11 November 2006 13:19, John Meyer wrote: >>> Okay, I got it to detect, now am having some problems getting it to get >>> the channels (I'm running Comcast) >> Does comcast require a cable box (settop box)? >> If so, the card is only going to see channel 4. >> >> You also want to check if it found and loaded the firmware correctly. >> >> I cant recall if SuSE distributed the firmware or not. >> >> As root do: >> dmesg | grep ivtv >> >> And compare it to the output of this page: >> http://ivtvdriver.org/index.php/Howto:Suse >> >> (might not be exactly the same but the bit about loading >> the firmware should be there.) >> >> That page has sections specific to each suse version > > I have a WinTV-PVR 350 as well. I run 10.0 at this moment. > > I have followed that page a few times. One time I had succes, untill there > was a kernel upgrade. I have tried again and still get nothing. > > I have written what I have done down and have again followed it to no > avail. > > I also have written a script to run, as to follow the HOWTO's and README's > and what not. I am not realy a newbie, so I have a bit of an idea what I > am doing, yet I have enourmous problems getting it to work. First because > I am so used that hardware just works with SUSE, second becoause the sites > all point from one place to another. > > As the README and HOWTO's are basicaly an set of instructions you need to > follow, why has nobody writen a simpel script that does all that? I treid, > but as long as it does not work with me, I can't spread it around. > > What I did the first time and the script I had written can be found here: > http://houghi.org/Fun/haupauge/index.php > > Again, it is very frustrating that I can not get it to work after several > hundred tries and at least 100 hours and about 50 sites, including the one > above. Also because I looked before buying and it was said that it would > be the easiest card to get working. > > So if somebody could look at my notes, look at the script and tell me what > I missed after the kernel update, please let me know. > > houghi
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
