在 2006-11-14二的 20:32 +0800，张韡武写道： > 在 2006-11-05日的 13:03 +0100，Peo Nilsson写道： > > On Sun, 2006-11-05 at 19:23 +0800, 张韡武 wrote: > > > > > installation. Check display card properties, it shows the "Enable 3D > > > accelerate" checkbox is in gray color, that is, I cannot check this > > > checkbox. > > If nvidias driver is properly installed you should have 3D accel. > > Don´t bother about the checkbox in yast (enable 3D), it´s enabled > > nomatter what it says. Somewhere in the documentation I have read > > about this issue, don´t remember where though. > > Thank you very much for offering this checklist to determine my problem. > I believe I have nvidia driver properly installed : first by using the > install source of download.nvidia.com and when it doesn't work, run the > install program of nvidia to have compiled a kernel module. X starts > fine. > > > > 1) What happens if you run 'glxgears' in a shell. > > If it runs you have 3D enabled. > > I have glxgear runs fine, I can reach as much as 1800 FPS. (Before using > nvidia driver I can reach only around 500 FPS with nv driver) > > > 2) Read the mail archive, there have been a LARGE amount about > > the nvidia drievr. > > > > If you still can´t get it to run properly, please feel free to post > > again. > > Also if it works out for you, do tell it in a post. > > SaX2 said I have Geforce Go 6150. 3D is enabled and not possible to > disable (checkbox always checked). > > However gnome-xgl-setting display this information: > Video card: nVidia Corporation C51 PCI Express Bridge > Your video card is not in XGL's database > 3D Acceleration: Disabled > Desktop Effect: Disabled > > I was also told that I can run SaX to fix this, but actually I can do > nothing in SaX (because 3D is already enabled). > > I also checked gentoo's xgl compatibility and it's clearly written my > type of card is supported. Actually that's why I sold my old notebook to > get this new one: in order to play with XGL effects. I checked XGL > compatibility before I decide to purchase this notebook. I think if > gentoo can run XGL on it, SuSE must be able to too. > > Any hint?
Now I can run it! I tried this: I discovered a new command gnome-xgl-switch and I enabled XGL with this command. Reboot the computer and then xgl works! I think this should be filed as a bug: a supported brand of video card is by mistake considered not-supported and users are forbidden to activate xgl by using control center panel. > -- 锐业软服（国内业务） http://www.realss.cn Real SoftService http://www.realss.com 销售咨询(Sales Department): 0086 592 20 99987 (Chinese, German, English) 国际业务(International Sales): 0086 10 8460 6011 (German and English) 联系：厦门大学科技园，嘉庚二号楼6楼 邮政：厦门大学2312号信箱（邮编361005）
signature.asc
Description: 这是信件的数 字签名部分
