On 2006/11/25 02:25 (GMT+0200) Andrei Verovski (aka MacGuru) apparently typed:
> I have replaced my dead monitor with new widescreen LCD ViewSonic VX2025 with > native resolution 1680x1050 (I think it is equal to Apple Cinema Display and > other 20.1" analogs). > The problem is that SAX cannot set resolution over 1280x1024 no matter what I > have tried. I even deleted x.org configs, reinstalled x.org, sax2, nVidia > 9629 drivers and even reset BIOS. > VX2025 is not listed in SAX hardware profiles, and unfortunately, SAX has a > bug and it cannot read driver CD neither from Combo neither from DVD-R I > have. I could copy vx2025.inf file, but I cannot find where. > SAX generated xconfig and x.org logs are attached I'm no expert on nvidia. I see in the log that no valid 1680x1050 mode was found, but have no idea why. > Section "Device" > BoardName "GeForce FX 5500" > BusID "1:5:0" > Driver "nvidia" Just as a test, I suggest you manually edit xorg.conf and substitute in the line above "nv" for "nvidia" and see if 1680x1050 works. I bought http://www.viewsonic.com/products/desktopdisplays/lcddisplays/graphicseries/vg2021m/index.htm about two months ago, and it works with every video card I've tried just fine in factory and 10.0. -- "Rejoice and be glad, because great is your reward in heaven." Matthew 5:12 NIV Team OS/2 ** Reg. Linux User #211409 Felix Miata *** http://mrmazda.no-ip.com/ -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
