Adriaan van Nijendaal wrote:
Good morning!
I have a Pinnacle PC/TV Pro with radio that used to work under SuSE
9.3. Parameters for bttv: "options bttv autoload=1 card=52 pll=2
radio=1 tuner=0"
In SuSE 10.1 (bttv 0.9.16) the TV does work, but the radio does NOT.
And that's the thing I really miss...
I read the kernel source and started trying things:
pll=0 -> no message in syslog
pll=1 -> "PLL: 28636363 => 35468950 ..........failed"
pll=2 -> "PLL can sleep, using XTAL (35468950)"
card=39 -> seems to work, but puts "PLL: 28636363 => 35468950
..........failed" in syslog anytime I change a channel with tvtime.
tuner=0,1,2,5, -> I gave up after a while - the combinations are too
many
The ting that _really_ puzzles me is that tuning to 100.45 Mhz FM
gives me FM radio with all of the above combinations. But my favorite
station broadcasts at 98.6... :-( At most other frequencies I hear
nothing (not even static). Is it a tuner problem? A phase lock loop? A
stereo decoder? A mixer?
It's an PC/TV Pro with an BT848, Philips TDA9800, TSA5522T, TDA5737M
and two crystals 35.46895 and 28.63636 in a tin box. The Radio
piggyback has an MSP3410D, Philips TDA1308 and once chip I cannot read
without desoldering something.
I've searched for the chip datasheets but I cannot understand them - I
know nothing about TV (or radio) electronics.
Question:
Any ideas as to how to get the radio on a PC/TV Pro to work under
10.1?
Thanks in advance,
Adriaan
Did you set radio=1?
Cheers.
--
In a period of great joy and pleasure you are comforted by the thought
that tragedy is just around the corner.
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
