I have just installed 10.2 on a T21 that was running SuSE 9.2. The Linksys WPC11 wireless card no longer works with the new version. I have tried the orinoco_cs and hostap_cs drivers without success. I even tried compiling the old prism2_cs module but still it does not work. Here's the hostap_cs error messages:
Jan 8 11:57:15 server kernel: pccard: PCMCIA card inserted into slot 1 Jan 8 11:57:15 server kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Jan 8 11:57:15 server kernel: pcmcia: registering new device pcmcia1.0 Jan 8 11:57:16 server kernel: ieee80211_crypt: registered algorithm 'NULL' Jan 8 11:57:16 server kernel: hostap_cs: 0.4.4-kernel (Jouni Malinen <[EMAIL PROTECTED]>) Jan 8 11:57:16 server kernel: hostap_cs: setting Vcc=33 (constant) Jan 8 11:57:16 server kernel: Checking CFTABLE_ENTRY 0x01 (default 0x01) Jan 8 11:57:16 server kernel: IO window settings: cfg->io.nwin=1 dflt.io.nwin=1 Jan 8 11:57:16 server kernel: io->flags = 0x0046, io.base=0x0000, len=64 Jan 8 11:57:16 server kernel: hostap_cs: Registered netdevice wifi0 Jan 8 11:57:16 server kernel: hostap_cs: index 0x01: , irq 3, io 0x0100-0x013f Jan 8 11:57:16 server kernel: prism2_hw_init: initialized in 200 ms Jan 8 11:57:18 server kernel: wifi0: hfa384x_cmd: entry still in list? (entry=cfed7ea0, type=0, res=0) Jan 8 11:57:18 server kernel: wifi0: hfa384x_cmd: command was not completed (res=0, entry=cfed7ea0, type=0, cmd=0x0021, param0=0xfd0b, EVSTAT=8010 INTEN=0010) Jan 8 11:57:18 server kernel: wifi0: interrupt delivery does not seem to work Jan 8 11:57:18 server kernel: wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd0b, len=8) Jan 8 11:57:18 server kernel: Could not get RID for component NIC Jan 8 11:57:18 server kernel: hostap_cs: Initialization failed The card itself is fine as it is recognised correctly in my T60p running SuSE 10.1: Jan 8 10:42:33 koetsu kernel: pccard: PCMCIA card inserted into slot 0 Jan 8 10:42:33 koetsu kernel: pcmcia: registering new device pcmcia0.0 Jan 8 10:42:33 koetsu kernel: hostap_cs: setting Vcc=33 (constant) Jan 8 10:42:33 koetsu kernel: hostap_cs: setting Vcc=50 (from config) Jan 8 10:42:33 koetsu kernel: Checking CFTABLE_ENTRY 0x01 (default 0x01) Jan 8 10:42:33 koetsu kernel: IO window settings: cfg->io.nwin=1 dflt.io.nwin=1 Jan 8 10:42:33 koetsu kernel: io->flags = 0x0046, io.base=0x0000, len=64 Jan 8 10:42:33 koetsu kernel: hostap_cs: Registered netdevice wifi0 Jan 8 10:42:33 koetsu kernel: hostap_cs: index 0x01: Vcc 5.0, irq 3, io 0xa100-0xa13f Jan 8 10:42:33 koetsu kernel: prism2_hw_init: initialized in 200 ms Jan 8 10:42:33 koetsu kernel: wifi0: NIC: id=0x801b v1.0.0 Jan 8 10:42:33 koetsu kernel: wifi0: PRI: id=0x15 v1.1.0 Jan 8 10:42:33 koetsu kernel: wifi0: STA: id=0x1f v1.4.2 I can see that there are differences in the hostap_cs.c source for the 2.6.18.2-34-default kernel (SuSE 10.2) to the 2.6.16.27-0.6-bigsmp kernel from the working 10.1 install. Are there any updates to the hostap driver that I can try? Or is it a more general wireless problem with 2.6.18 since the orinoco_cs and prism2_cs drivers also do not work? Cosmo -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
