Danesh Daroui <[EMAIL PROTECTED]> writes: > I ran hwinfo --wlan and the result is: > > 12: PCI 202.0: 0200 Ethernet controller > [Created at pci.286] > UDI: /org/freedesktop/Hal/devices/pci_14e4_4320 > Unique ID: rBUF._LuIAhxm4a3 > Parent ID: qscc.S+4MMSCCLf5 > SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:02:02.0 > SysFS BusID: 0000:02:02.0 > Hardware Class: network > Model: "Hewlett-Packard Company nx9500 Built-in Wireless" > Vendor: pci 0x14e4 "Broadcom" > Device: pci 0x4320 "BCM4306 802.11b/g Wireless LAN Controller" > SubVendor: pci 0x103c "Hewlett-Packard Company" > SubDevice: pci 0x12f4 "nx9500 Built-in Wireless" > Revision: 0x03 > Driver: "bcm43xx" > Driver Modules: "bcm43xx" > Device File: eth0 > Features: WLAN > Memory Range: 0xd0200000-0xd0201fff (rw,non-prefetchable) > IRQ: 201 (no events) > HW Address: 00:90:4b:53:b6:21 > WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 > WLAN frequencies: 2.412e-05 2.417e-05 2.422e-05 2.427e-05 2.432e-05 > 2.437e-05 2.442e-05 2.447e-05 2.452e-05 2.457e-05 2.462e-05 2.467e-05 > 2.472e-05 2.484e-05 > WLAN bitrates: 1.2e-05 1.8e-05 2.4e-05 3.6e-05 4.8e-05 7.2e-05 9.6e-05 > 0.000108 2e-06 4e-06 1.1e-05 2.2e-05 > WLAN encryption modes: WEP40 WEP104 > WLAN authentication modes: open sharedkey > Module Alias: "pci:v000014E4d00004320sv0000103Csd000012F4bc02sc80i00" > Driver Info #0: > Driver Status: bcm43xx is active > Driver Activation Cmd: "modprobe bcm43xx" > Config Status: cfg=no, avail=yes, need=no, active=unknown > Attached to: #8 (PCI bridge) > > I think it shows that my wireless card is installed successfully but I > can not still connect to a network...
Broadcom support is not quite fully working yet :-( Andreas -- Andreas Jaeger, [EMAIL PROTECTED], http://www.suse.de/~aj/ SUSE LINUX Products GmbH, GF: Markus Rex, HRB 16746 (AG Nürnberg) Maxfeldstr. 5, 90409 Nürnberg, Germany GPG fingerprint = 93A3 365E CE47 B889 DF7F FED1 389A 563C C272 A126
pgpuDrDl0Hhq5.pgp
Description: PGP signature
