Hi everybody,
if I suspend to disk I loose the USB hub. I also tried to unload the
related modules before suspending:
SUSPEND_MODULES="button uhci_hcd ehci_hcd usbhid usbcore"
The messages (see below) report an error related to uhci_hcd and
HCRESET, I googled the problem but I couldn't find a solution.
Does anybody have experience with this?
Many thanks,
G
Feb 13 18:12:45 cms09xl kernel: usb usb4: root hub lost power or was reset
Feb 13 18:12:45 cms09xl kernel: ehci_hcd 0000:00:1d.7: debug port 1 IN USE
Feb 13 18:12:45 cms09xl kernel: PCI: cache line size of 32 is not
supported by device 0000:00:1d.7
Feb 13 18:12:45 cms09xl kernel: ehci_hcd 0000:00:1d.7: PCI post-resume
error -19!
Feb 13 18:12:45 cms09xl kernel: ehci_hcd 0000:00:1d.7: HC died; cleaning up
Feb 13 18:12:45 cms09xl kernel: PM: Writing back config space on device
0000:00:1e.0 at offset 6 (was 20020200, writing 20060200)
Feb 13 18:12:45 cms09xl kernel: PCI: Setting latency timer of device
0000:00:1e.0 to 64
Feb 13 18:12:45 cms09xl kernel: PM: Writing back config space on device
0000:00:1f.5 at offset 1 (was 2900007, writing 2900000)
Feb 13 18:12:45 cms09xl kernel: PCI: Enabling device 0000:00:1f.5 (0000
-> 0003)
Feb 13 18:12:45 cms09xl kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] ->
Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Feb 13 18:12:45 cms09xl kernel: PCI: Setting latency timer of device
0000:00:1f.5 to 64
Feb 13 18:12:45 cms09xl kernel: eth1: Coming out of suspend...
Feb 13 18:12:45 cms09xl kernel: ACPI: PCI Interrupt 0000:02:02.0[A] ->
Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Feb 13 18:12:46 cms09xl kernel: PM: Writing back config space on device
0000:02:03.0 at offset f (was 1c00105, writing 5c00105)
Feb 13 18:12:46 cms09xl kernel: PM: Writing back config space on device
0000:02:03.0 at offset 3 (was 28008, writing 2a820)
Feb 13 18:12:46 cms09xl kernel: ACPI: PCI Interrupt 0000:02:03.0[A] ->
Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Feb 13 18:12:46 cms09xl kernel: pnp: Device 00:06 does not support
activation.
Feb 13 18:12:46 cms09xl kernel: pnp: Device 00:07 does not support
activation.
Feb 13 18:12:46 cms09xl kernel: pnp: Device 00:09 activated.
Feb 13 18:12:46 cms09xl kernel: Restarting tasks... done
Feb 13 18:12:46 cms09xl kernel: Thawing cpus ...
Feb 13 18:12:51 cms09xl kernel: USB Universal Host Controller Interface
driver v3.0
Feb 13 18:12:51 cms09xl kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] ->
Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Feb 13 18:12:51 cms09xl kernel: PCI: Setting latency timer of device
0000:00:1d.0 to 64
Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: new USB bus
registered, assigned bus number 1
Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: HCRESET not
completed yet!
Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: irq 10, io base
0x00001200
Feb 13 18:12:51 cms09xl kernel: usb usb1: new device found,
idVendor=0000, idProduct=0000
Feb 13 18:12:51 cms09xl kernel: usb usb1: new device strings: Mfr=3,
Product=2, SerialNumber=1
Feb 13 18:12:51 cms09xl kernel: usb usb1: Product: UHCI Host Controller
Feb 13 18:12:51 cms09xl kernel: usb usb1: Manufacturer: Linux
2.6.18.2-34-default uhci_hcd
Feb 13 18:12:51 cms09xl kernel: usb usb1: SerialNumber: 0000:00:1d.0
Feb 13 18:12:51 cms09xl kernel: usb usb1: configuration #1 chosen from 1
choice
Feb 13 18:12:51 cms09xl kernel: hub 1-0:1.0: USB hub found
Feb 13 18:12:51 cms09xl kernel: hub 1-0:1.0: 0 ports detected
Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: host system
error, PCI problems?
Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: host controller
process error, something bad happened!
Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: host controller
halted, very bad!
Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: HCRESET not
completed yet!
Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: HC died; cleaning up
Feb 13 18:12:51 cms09xl kernel: hub 1-0:1.0: activate --> -108
Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.0: HC died; cleaning up
Feb 13 18:12:51 cms09xl kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] ->
Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
Feb 13 18:12:51 cms09xl kernel: PCI: Setting latency timer of device
0000:00:1d.1 to 64
Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.1: new USB bus
registered, assigned bus number 2
Feb 13 18:12:51 cms09xl kernel: uhci_hcd 0000:00:1d.1: HCRESET not
completed yet!
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: irq 10, io base
0x00001600
Feb 13 18:12:52 cms09xl kernel: usb usb2: new device found,
idVendor=0000, idProduct=0000
Feb 13 18:12:52 cms09xl kernel: usb usb2: new device strings: Mfr=3,
Product=2, SerialNumber=1
Feb 13 18:12:52 cms09xl kernel: usb usb2: Product: UHCI Host Controller
Feb 13 18:12:52 cms09xl kernel: usb usb2: Manufacturer: Linux
2.6.18.2-34-default uhci_hcd
Feb 13 18:12:52 cms09xl kernel: usb usb2: SerialNumber: 0000:00:1d.1
Feb 13 18:12:52 cms09xl kernel: usb usb2: configuration #1 chosen from 1
choice
Feb 13 18:12:52 cms09xl kernel: hub 2-0:1.0: USB hub found
Feb 13 18:12:52 cms09xl kernel: hub 2-0:1.0: 0 ports detected
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: host system
error, PCI problems?
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: host controller
process error, something bad happened!
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: host controller
halted, very bad!
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: HCRESET not
completed yet!
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: HC died; cleaning up
Feb 13 18:12:52 cms09xl kernel: hub 2-0:1.0: activate --> -108
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.1: HC died; cleaning up
Feb 13 18:12:52 cms09xl kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] ->
Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Feb 13 18:12:52 cms09xl kernel: PCI: Setting latency timer of device
0000:00:1d.2 to 64
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: new USB bus
registered, assigned bus number 3
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: HCRESET not
completed yet!
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: irq 10, io base
0x00001700
Feb 13 18:12:52 cms09xl kernel: usb usb3: new device found,
idVendor=0000, idProduct=0000
Feb 13 18:12:52 cms09xl kernel: usb usb3: new device strings: Mfr=3,
Product=2, SerialNumber=1
Feb 13 18:12:52 cms09xl kernel: usb usb3: Product: UHCI Host Controller
Feb 13 18:12:52 cms09xl kernel: usb usb3: Manufacturer: Linux
2.6.18.2-34-default uhci_hcd
Feb 13 18:12:52 cms09xl kernel: usb usb3: SerialNumber: 0000:00:1d.2
Feb 13 18:12:52 cms09xl kernel: usb usb3: configuration #1 chosen from 1
choice
Feb 13 18:12:52 cms09xl kernel: hub 3-0:1.0: USB hub found
Feb 13 18:12:52 cms09xl kernel: hub 3-0:1.0: 0 ports detected
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: host system
error, PCI problems?
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: host controller
process error, something bad happened!
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: host controller
halted, very bad!
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: HCRESET not
completed yet!
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: HC died; cleaning up
Feb 13 18:12:52 cms09xl kernel: hub 3-0:1.0: activate --> -108
Feb 13 18:12:52 cms09xl kernel: uhci_hcd 0000:00:1d.2: HC died; cleaning up
--
--------------------------
Gianluca Cerminara
Tel. CERN +41 (0)22 76 71519
Tel. TO +39 011 670 7372
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
