Onsdag 28 marts 2007 19:55 kvad A. den Oudsten: > Kai Ponte wrote: > > On Tuesday 27 March 2007 08:32:45 am A. den Oudsten wrote: > >>I'm using 10.2 and want to listen to music. > >>Playing Amarok I see the music played but don't hear anything > >>In YaST2 I see KT266 onboard audio is the default. > >>The volume for CD is 67 and for PCspeakers 53. > >>What else should I do to hear music? > > > > I'm assuming you can hear other sounds - system and whatnot. > > > > Since I use KDE, I'll forward that solution. > > > > Go to Geeko > Multimedia > Volume Control (KMix) > > > > This will bring up your mixer application. Check to make sure all > > your outputs are enabled (light green as opposed to dark green) > > and that the volumes are turned up. > > > > Assuming this is all well and good, then open Amarok and go to > > Settings > Configure Amarok. > > > > Click on the Engine Icon. For your sound System drop down make > > sure you have something selected. I have Xine, but you can use > > others. For the Output plugin, if Autodetect doesn't work for > > you, select the appropriate plugin - alsa or oss. > > > > If this all doesn't work, then you need to go into YaST and check > > your sound settings there. We can revisit if needed. > > Tried all you suggested, with no results. > In Yast I see still KT266 onboardsound is default and the driver is > snd-via82xx. > > Any other sugestions?
Have you tried checking all your hardware connections and physical settings, as I suggested? Best regards :o) Johnny :o) -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]