> Mates. > > I have a new Acer AL2216W that runs native at 1680x1050. The install > is > Suse 10 with xorg-x11-6.8.2-100.2. The video card supports 1680x1050 > natively and works well under M$. I cannot for the life of me get the > display to work under suse 10 at anything other that 1280x1024. > > I have installed and used 915resulution to patch Mode 30 to 1680x1050 > at > 24 bits/pixel: > > providence:/home/david/Documents/linux/video_WideScreen # 915resolution -l > Intel 800/900 Series VBIOS Hack : version 0.5.2 > > Chipset: 915G > BIOS: TYPE 1 > Mode Table Offset: $C0000 + $269 > Mode Table Entries: 27 > > Mode 30 : 1680x1050, 24 bits/pixel > Mode 32 : 800x600, 8 bits/pixel > Mode 34 : 1024x768, 8 bits/pixel > Mode 38 : 1280x1024, 8 bits/pixel > Mode 3a : 1600x1200, 8 bits/pixel > Mode 3c : 1920x1440, 8 bits/pixel > Mode 41 : 1680x1050, 16 bits/pixel > Mode 43 : 800x600, 16 bits/pixel > Mode 45 : 1024x768, 16 bits/pixel > Mode 49 : 1280x1024, 16 bits/pixel > Mode 4b : 1600x1200, 16 bits/pixel > Mode 4d : 1920x1440, 16 bits/pixel > Mode 50 : 1680x1050, 32 bits/pixel > Mode 52 : 800x600, 32 bits/pixel > Mode 54 : 1024x768, 32 bits/pixel > Mode 58 : 1280x1024, 32 bits/pixel > Mode 5a : 1600x1200, 32 bits/pixel > Mode 5c : 1920x1440, 32 bits/pixel > > I have edited /etc/X11/xorg.conf to include the proper modeline created > with > gft to include the following: > > Section "Monitor" > Option "CalcAlgorithm" "XServerPool" > DisplaySize 452 283 > HorizSync 30-70 > Identifier "Monitor[0]" > ModelName "[EMAIL PROTECTED]" > Option "DPMS" > VendorName "--> LCD" > VertRefresh 59-63 > UseModes "Modes[0]" > EndSection > > > Section "Modes" > Identifier "Modes[0]" > Modeline "1680x1050_60.00" 147.14 1680 1784 1968 2256 1050 1051 1054 > 1087 -HSync +Vsync > EndSection > > > Section "Screen" > DefaultDepth 24 > SubSection "Display" > Depth 15 > Modes "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1280x1024" > "1440x900" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" > "800x600" "768x576" "640x480" > EndSubSection > > X starts just fine and Sax2 shows the resolution to be at 1680x1050 at > 60 Hz, but the display is still squished like 1280x1024 is being stretched > to 1680x1050. The Image fills the screen just fine, but it is obviously > *not* right. Also, KDE control center -> display shows the resolution at > 1280X1024 at 75Hz and I cannot select 1680x1050 in the control center. >
You might read this too: http://pinot.rnome.com/LCD.pdf It helped me out with 10.0 and an ACER TM6003 (1400x1050). No problems in 10.2 btw. > *Help*, what else can I try???? > > -- > David C. Rankin, J.D., P.E. > 510 Ochiltree Street > Nacogdoches, Texas 75961 > (936) 715-9333 > (936) 715-9339 fax > www.rankinlawfirm.com > -- > > -- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > -- L. de Braal BraHa Systems NL - Terneuzen T +31 115 649333 F +31 115 649444 -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
