BandiPat wrote: > > Peter, > This card should be well supported under Xorg's native radeon driver. > There is no need to use ATI's drivers for this card to get acceptable > 3D on your setup, it's a good card and there is no need to replace it > at this time unless you need too.
Fully agreed. Same here with a 9200 SE, which does not work with the latest ATI drivers and the old drivers do not work with the current xorg 7.2. But: There is definitely no need! 3D with the native Radeon driver works ok (within the limits of such an "old iron") If you do need to, then by all means > get another ATI card, because most, except for the very latest cards, > are supported natively in Xorg. This makes them both convenient and > easy to set up using Sax2 in runlevel 3. > > You will need to find either 8.28 or 8.29 version of the ATI driver, if > you want to use that. Yes, sadly afaik they will not work with xorg 7.2 regards Eberhard -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
