Is it possible to disable the hw/scsi scan on suse 10.2, or would this cause the system not to boot?
This is related to my issue with raid/scsi drives here: http://lists.opensuse.org/opensuse/2007-04/msg03328.html I believe I have isolated the problem to the scsi scan and the megaraid driver. A proper boot on suse 9.3 finds the raid, then processor: <6>scsi0 : LSI Logic MegaRAID E 254 commands 16 targs 5 chans 7 luns <5>scsi0: scanning scsi channel 0 for logical drives. <5> Vendor: MegaRAID Model: LD0 RAID5 34730R Rev: E <5> Type: Direct-Access ANSI SCSI revision: 02 <5>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 <5>scsi0: scanning scsi channel 4 [P0] for physical devices. <5> Vendor: HP Model: SAFTE; U160/M BP Rev: 1021 <5> Type: Processor ANSI SCSI revision: 02 Suse 10.2 finda the raid and then the other attached drives, no processor: <6>scsi0 : LSI Logic MegaRAID E 254 commands 16 targs 5 chans 7 luns <5>scsi0: scanning scsi channel 0 for logical drives. <5> Vendor: MegaRAID Model: LD0 RAID5 34730R Rev: E <5> Type: Direct-Access ANSI SCSI revision: 02 <5>scsi0: scanning scsi channel 4 [P0] for physical devices. <5> Vendor: HP Model: 18.2GB C 80-D94N Rev: D94N <5> Type: Direct-Access ANSI SCSI revision: 02 I have opened a bug report on this as well: https://bugzilla.novell.com/show_bug.cgi?id=270277 -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
