SLED10/SUSE10.1 No wireless adapter appears in network manager, and none shows when I do an ifconfig. However, in YAST I see two hardware detected (see below).
What do I have to do to get this working? What module should be loaded, how do I understand what YAST is telling me?
From Yast/NetworkDevices/Network Card:
the "name" is: "Wireless LAN cards using direct PCI Interface". When I edit/Advanced/Hardware Details is says: "configuration name: wlan0" "Hardware name: static-0" "Kernel Module" "Hardware Configuration Name: static-0" "Module Name: orinoco_pci" from the yast hardware report: 29: PCI 303.0: 0280 Network controller [Created at pci.305] UDI: /org/freedesktop/Hal/devices/pci_14e4_4320 Unique ID: 5FRj.ts7Hp0QB3M1 Parent ID: 6NW+.InKz0bgid89 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:03.0 SysFS BusID: 0000:03:03.0 Hardware Class: network Model: "Dell Wireless 1350 WLAN Mini-PCI Card" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x4320 "BCM4306 802.11b/g Wireless LAN Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0003 "Wireless 1350 WLAN Mini-PCI Card" Revision: 0x03 Memory Range: 0xdfbfe000-0xdfbfffff (rw,non-prefetchable) IRQ: 10 (no events) Module Alias: "pci:v000014E4d00004320sv00001028sd00000003bc02sc80i00" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #20 (PCI bridge) 63: None 00.0: 10781 Network Interface [Created at net.115] Unique ID: wl2P.nfEXJulusj6 SysFS ID: /class/net/sit0 Hardware Class: network interface Model: "Network Interface" Device File: sit0 Config Status: cfg=no, avail=yes, need=no, active=unknown -- "Do not be idolatrous or bound to any doctrine, theory or ideology, even Buddhist ones. All systems of thought are guiding means, not absolute truth." Thich Nhat Hanh, Vietnamese monk. http://www.seaox.com/thich.html www.the-brights.net -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
