Hello, On Thu, 17 May 2007 13:25:03 +0200 Jan Kalcic <[EMAIL PROTECTED]> wrote:
> Michael Kershaw wrote: > > Jan, > > > > In your ifcfg-bond0, instead of listing the interface as the > > bonding_slave's, have you tried to tell it the pci info instead like > > so: > > > > > > BONDING_SLAVE0='bus-pci-0000:04:02.0' > > BONDING_SLAVE1='bus-pci-0000:04:02.1' > > > > Here's my complete ifcfg-bond0: > > > > BOOTPROTO='static' > > BROADCAST='192.168.148.31' > > IPADDR='192.168.148.30' > > MTU='1500' > > NETMASK='255.255.255.224' > > NETWORK='192.168.148.0' > > REMOTE_IPADDR='' > > STARTMODE='onboot' > > BONDING_MASTER='yes' > > BONDING_MODULE_OPTS='mode=active-backup miimon=100' > > BONDING_SLAVE0='bus-pci-0000:04:02.0' > > BONDING_SLAVE1='bus-pci-0000:04:02.1' > > > > Let me know if this helps! > > Unfortunately not. I still have the problem both using pci info and > adapting your config file. I guess is something wrong with the > configuration as I have the same problem anywhere I try (openSuSE as > well as SLES) I'm not using bonding. so, I'm not sure, but is this related to the issue? https://bugzilla.novell.com/show_bug.cgi?id=250620 Regards, eshsf -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
