Rajko M. wrote: > > this mail arrived direct to my inbox. > You should use Reply to All in Thunderbird. It will send 2 emails if you > don't > edit the address field, but it will land in mail list.
Sorry about that. I knew that, but it was late, and this is the ONLY list that doesn't reply-to the list, of all the ones I'm subscribed to. Your suggestions to list the PCI devices was a good one; the sound card shows up in slot 5, where the hardware info probe shows it: linux-Alpine:/lib/modules/2.6.18.8-0.3-default/kernel/sound/pci/hda # lspci 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 USB Controller: NEC Corporation USB (rev 43) 01:05.1 USB Controller: NEC Corporation USB (rev 43) 01:05.2 USB Controller: NEC Corporation USB 2.0 (rev 04) 01:06.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 (rev 11) 02:00.0 VGA compatible controller: nVidia Corporation GeForce 7300 GS (rev a1) And hwinfo displays the same information as before: 18: PCI 05.0: 0403 Audio device [Created at pci.286] UDI: /org/freedesktop/Hal/devices/pci_10de_3f0 Unique ID: CvwD.aVYG86RKEd7 SysFS ID: /devices/pci0000:00/0000:00:05.0 SysFS BusID: 0000:00:05.0 Hardware Class: sound Model: "Elitegroup Audio device" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x03f0 SubVendor: pci 0x1019 "Elitegroup Computer Systems" SubDevice: pci 0xa88d Revision: 0xa2 Memory Range: 0xfe028000-0xfe02bfff (rw,non-prefetchable) IRQ: 11 (no events) Module Alias: "pci:v000010DEd000003F0sv00001019sd0000A88Dbc04sc03i00" Config Status: cfg=no, avail=yes, need=no, active=unknown The two files were were you said to expect them, so I'm not sure why YaST said that it couldn't find the module. Does any of this give you any ideas I should try? I hope it doesn't turn out to be something really stupid, like the speaker/mic cables plugged into the motherboard incorrectly! I'll double-check all that when I get home from work today. Thanks again for all your help, Jerry in Bothell, WA -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
