On Fri, Jun 15, Masaru Nomiya wrote: > Hello, > > In the Message; > > Subject : [opensuse] Samsung 204b problem > Message-ID : <[EMAIL PROTECTED]> > Date & Time: Thu, 14 Jun 2007 21:26:12 -0400 > > [Michael] == Michael Fischer <[EMAIL PROTECTED]> has written: > > Michael> FWIW, I tried running sax2 from another machine over ssh. > Michael> Sax2 (mis)identified the monitor as a Samsung Syncmaster 45. > Michael> I did not see the correct model in the list (but that's > Michael> probably because 9.3 predates the model). I changed the > Michael> Horz and Vert according to some specs I found online, but > Michael> that made no particular difference (small surprise). > > Show the section "Monitor" part of xorg.conf. > And inform us of the resokution which you will use.
I never made it into X, as I couldn't ever see the console once the new monitor was plugged in. Well, here is the old one: Section "Monitor" Option "CalcAlgorithm" "CheckDesktopGeometry" DisplaySize 370 280 HorizSync 30-95 Identifier "Monitor[0]" ModelName "G790" Option "DPMS" VendorName "VIEWSONIC" VertRefresh 50-180 UseModes "Modes[0]" EndSection And here is what sax came up with (modulo my changes to horz & vert) for the new monitor Section "Monitor" Option "CalcAlgorithm" "CheckDesktopGeometry" DisplaySize 410 310 HorizSync 31-81 Identifier "Monitor[0]" ModelName "SYNCMASTER 4S" Option "DPMS" VendorName "SAMSUNG" VertRefresh 56-75 UseModes "Modes[0]" EndSection Note that that did not cause the monitor to show the console. Michael -- Michael Fischer Happiness is a config option. [EMAIL PROTECTED] Recompile and be happy. -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
