BandiPat wrote:
> On Thursday 14 June 2007, Pueblo Native wrote:
>
>> What's the easiest way to get my system to use the USB mouse instead
>> of the PS/2 one?
>>
>
> ----------
> Use the USB to PS/2 adapter that came with the mouse! ;-p
>
> Otherwise, I think you'll have to adjust the BIOS to use or start USB
> devices right away and then run sax2 to again setup your graphics and
> mouse, etc.
>
> Lee
>
By the way, here's what yast is reporting:
69: USB 00.0: 10503 USB Mouse
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_62a_0_noserial_if0
Unique ID: MtLc.MNeZkTWIK65
Parent ID: k4bc.er+aLfBntNE
SysFS ID: /devices/pci0000:00/0000:00:0b.0/usb1/1-6/1-6:1.0
SysFS BusID: 1-6:1.0
Hardware Class: mouse
Model: "USB Mouse"
Hotplug: USB
Vendor: usb 0x062a
Device: usb 0x0000
Compatible to: int 0x0210 0x0015
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/mice (/dev/input/mouse1)
Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event3,
/dev/input/by-id/usb-062a_0000-event-mouse,
/dev/input/by-path/pci-0000:00:0b.0-usb-0:6:1.0-event-mouse,
/dev/input/by-id/usb-062a_0000-mouse,
/dev/input/by-path/pci-0000:00:0b.0-usb-0:6:1.0-mouse
Device Number: char 13:63 (char 13:33)
Speed: 1.5 Mbps
Module Alias: "usb:v062Ap0000d0000dc00dsc00dp00ic03isc01ip02"
Driver Info #0:
Buttons: 5
Wheels: 1
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #64 (Hub)
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
