On Sun, 2007-08-19 at 12:48 +0800, Art Fore wrote: > I used the xorg 7.3 rerpositories for 10.3. Found I have a few problems > with KDE on 10.3, so I may go back to the xorg 7.2. > > Art > > On Sat, 2007-08-18 at 21:11 -0700, Ben Kevan wrote: > > Congrats, > > > > Hope my blog was some kind of help. > > > > Sorry about the single -, wordpress for somereason does that, maybe I > > should > > update the blogs, I will also update to include the new repository (I now > > use > > the SUSE XORG:XGL one also. > > > > As for updating Xorg did you try updating to newer 7.2 packages? Or did you > > just go straight to 7.3? > > > > Again.. glad you got it working.. Compiz is pretty good.. > > > > Ben > > > > On Saturday 18 August 2007 12:00:54 am Art Fore wrote: > > > I got compiz-fusion running on both 10.3 and 10.2 X68-64 dual core and > > > without xgl. It was a 4 day battle, but I won in the end. Here is what > > > I did. > > > > > > 10.2 > > > I pretty much followed http://www.benkevan.com/blog/?p=66, which did not > > > work completely.. Then I changed the repository to > > > http://download.opensuse.org/repositories/xorg73/openSUSE_10.2, upgraded > > > the compiz-fusion, xorg, & mesa rpms. (These had all been upgraded > > > before but the 7.3 repository had slightly later versions). The > > > copoy/paste of > > > #! /bin/sh > > > compiz –replace ccp & > > > emerald –replace ccp & > > > > > > from http://www.benkevan.com/blog/?p=65 > > > did not work right. Ended up I had to change the - to --. > > > > > > I also added the nvidia repository and had already installed the invidia > > > kernel drivers previously. > > > > > > 10.3 > > > > > > First, adding the 10.2 nvidia repository did not work. I would not > > > recognize the drivers as they were for the wrong version of kernel. I > > > downloaded the NVIDIA-Linux-x86_64-100.14.11-pkg2.run and ran it with > > > the -q option. The -q is a must. Ended up that I needed to do this again > > > after I updated xorg for some reason or another, so you might want to do > > > this last. > > > > > > Used the XGL:/X11 repositories first, the the xorg73 repositories. in > > > Yast. Most of the packages were not upgraded, even though they were in > > > the repositories. I ended up downloding those that did not upgrade and > > > installed them manually. If fact, I had to get the emerald-themes from > > > the suse 10.2 repositoy. > > > > > > Hopefully by the time 10.3 is released, this will all get straightened > > > out, otherwise, it is really a big hassle. > > > > > > As far as the nvidia-config line from > > > http://www.benkevan.com/blog/?p=65, again another copy paste error on > > > the -, but it still did not work. Unrecognized --compite etc. Ended up I > > > had to do each option individually, then it worked. my xorg config added > > > lines are as follows: > > > > > > Under screen > > > > > > Section "Screen" > > > Identifier "Screen[0]" > > > Device "Device[0]" > > > Monitor "Monitor[0]" > > > DefaultDepth 24 > > > Option "AllowGLXWithComposite" "True" > > > Option "RenderAccel" "True" > > > Option "AddARGBGLXVisuals" "True" > > > SubSection "Display" > > > > > > and at the end > > > > > > Section "Extensions" > > > Option "Composite" "Enable" > > > EndSection > > > > > > Compiz is much faster and the compiz setting application is very nice. > > > Have to play around with all of the plug-ins and see what I really want > > > to use. > > > > > > Both CPUs are running 4 to 6 %. If I rotate the cube, etc., 1 cpu will > > > jump up to about 16% for only a short time while I am rotating the cube. > > > Now I will have to install this on my laptop at work where I have WinXP > > > running under parallels on Suse 10.2. Hopefully parallels will work with > > > it as I do max out the 2 cpus on it quite often with a simulation > > > program that only runs under winxp. > > > > > > Thanks to all that helped on the mail list. > > > > > > Art > > > > > > > > -- > > How much can you know about yourself, you've never been in a fight? I don't > > wanna die without any scars. So come on; hit me > > > I though this problem had been solved, but in reality, it has not. When I logged out in both 10.3 and 10.2, it locks up. Only mouse cursor moves, but nothing with right or left click. Ctrl+alt+bksp as well as ctrl+alt+delete does nothing. Only way out is power switch. Go back in, after it goes into compiz, immediate lockup. Finally got back into KDE by deleting the .kde directory and letting kde create it again. now the startcompiz.sh no longer does anything in 10.2, but in 10.3, it went back into compiz-fusion which worked until you log out again. Without the startcompiz.sh, it appears that some of compiz is till working, like fading and the fuzz around the active window.
Some questions When removing the startcompiz.sh file, it still goes into compiz. Only way out is as mentioned above to delete the .kde directory. What is compiz putting in KDE that is screwing things up when removing the .sh file? What does the compiz-kde-backend rpm do that I have seen but not installed? Art -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
