2007/9/8, Scott Newton <[EMAIL PROTECTED]>: > I have openSUSE 10.2 (with all the latest updates) installed on a machine that > has an ASUS M2N-MX SE motherboard. Quite regularly the machine will lock up, > independent of whether it is running in a tty or in X (ie locks up even when > X is not running). It doesn't seem to make any difference what parameters I > pass to the kernel (tried noacpi, irqpoll, etc). The motherboard and the hard > drive have been replaced so I don't believe it is a hardware fault unless > it's the power supply. I thought it might be the wireless card but it locks > up independent of whether it is in the machine or not. I've tried the latest > NVIDIA drivers but as it locks up even when X isn't running I don't think it > is the NVIDIA drivers. There is nothing in the log files that I can find or > in dmesg. > > When the machine locks the only way to reset it is to hit the reset button. > > The only thing odd I can find is that it seems to be only finding one of the > processors. > > I was wondering if anyone had any ideas as to what might be happening. > > Thanks > > eta:/proc # uname -a > Linux eta 2.6.18.8-0.5-default #1 SMP Fri Jun 22 12:17:53 UTC 2007 i686 athlon > i386 GNU/Linux > > eta:/proc # lspci > 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) > 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) > 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) > 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) > 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2) > 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2) > 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) > 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) > 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) > 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) > 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) > 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) > 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) > 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) > 00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6100 nForce 430 > (rev a2) > 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > HyperTransport Technology Configuration > 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Address Map > 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM > Controller > 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] > Miscellaneous Control > 01:06.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 [Libertas] > 802.11b/g Wireless (rev 03) > > eta:/proc # cat cpuinfo > processor : 0 > vendor_id : AuthenticAMD > cpu family : 15 > model : 75 > model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ > stepping : 2 > cpu MHz : 2009.238 > cache size : 512 KB > physical id : 0 > siblings : 1 > core id : 0 > cpu cores : 1 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 1 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca > cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm > 3dnowext 3dnow up pni cx16 lahf_lm cmp_legacy svm cr8legacy ts fid vid ttp tm > stc > bogomips : 4027.80 > > -- > Regards > Scott Newton > -- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > Any messages on the logs around the time it locks up?, i'm running [EMAIL PROTECTED] on a M2N32-SLI without issues. Make sure it's not heating up and that your RAM sticks are not damaged (run memtest)
Regards, Ciro -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
