michael norman wrote / napísal(a): > On Monday 24 September 2007 21:05:26 Michal Zugec wrote: >> michael norman wrote / napísal(a): >>> I have an HP Deskjet D2300 usb printer which is detected and set up by >>> the Yast printer module in 10.2. In 10.3 (the latest RC1) it is detected >>> but I cannot get a test print from Yast. I have been able set it up to >>> print using the KDE programme, so I know it works. Is there something >>> amiss with the 10.3 Yast printer setup ? >>> >>> Mike >> Today I fixed bug for usb printers (bug #326319). Check URI in your >> /etc/cups/printers.conf configuration >> >> -- >> Best Regards, >> Michal Zugec >> Software developer >> --------------------------------------------------------------------- > Michal > > Thank you, but what exactly are you saying I should do, change something in > the file and if so exactly what ? > > MIke >
Mike, case when you're hitting by this bug: output from "grep DeviceURI /etc/cups/printers.conf" contains "/dev/usb/lp0" In this case run "/usr/lib/cups/backend/usb" command and there should be something like "usb://EPSON/Stylus%20Photo%20810" (this is my case) replace "/dev/usb/lp0" by this string in /etc/cupd/printers.conf: ... Info Epson Stylus Printer Location USB tlačiareň na //EPSON/Stylus%20Photo%20810 DeviceURI usb://EPSON/Stylus%20Photo%20810 State Idle StateTime 1190615039 Accepting Yes ... after that restart cups service (be sure that there is nothing in queue otherwise it will be printer again from begining) : rccups restart I hope this helps you. Bye, Michal -- Best Regards, Michal Zugec Software developer --------------------------------------------------------------------- SuSE CR, s.r.o. e-mail: [EMAIL PROTECTED] Lihovarska 1060/12 tel: +420 284 028 960 190 00 Praha 9 fax: +420 296 542 374 Czech Republic http://www.suse.cz/ -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
