Hi,
I use SuSE 10.2 under VMWare Fusion on the Mac. I would like to use the
remote control.
Linux recognizes the IR:
sb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: new device found, idVendor=05ac, idProduct=8242
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: IR Receiver
usb 1-1: Manufacturer: Apple Computer, Inc.
usb 1-1: configuration #1 chosen from 1 choice
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: new device found, idVendor=0e0f, idProduct=0002
usb 1-2: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: VMware Virtual USB Hub
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 7 ports detected
usbcore: registered new driver hiddev
input: Apple Computer, Inc. IR Receiver as /class/input/input3
input: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on
usb-0000:00:07
.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
I also started rclircd with the configuration for A1156, but I do not
get any signals. irw does not say anything.
My suspision is that Linux recognizese the USB device, but does not know
that it is a IR device. Is there a way to test, wether signals come over
USB? Is there something I could do about the LIRC setup?
Thanks and greetings
Stefan
cat /proc/bus/input/devices
I: Bus=0003 Vendor=05ac Product=8242 Version=0016
N: Name="Apple Computer, Inc. IR Receiver"
P: Phys=usb-0000:00:07.2-1/input0
S: Sysfs=/class/input/input3
H: Handlers=event3
B: EV=1
--
Stefan Müller Tel: (+49) (+30) 838 52973
Fax: (+49) (030) 838 4 52973
Institut für Deutsche und Niederländische Philologie
Deutsche Grammatik
Boltzmannstraße 3
D-14195 Berlin
http://www.cl.uni-bremen.de/~stefan/
http://www.cl.uni-bremen.de/~stefan/Babel/Interaktiv/
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
