On Monday 08 October 2007 03:40:38 Muhammad Rivai wrote: > On 10/8/07, Nathaniel Dube <[EMAIL PROTECTED]> wrote: > > It would seem I'm not the only one having the same problem. > > > > http://www.suseforums.net/index.php?act=ST&f=20&t=39625 > > http://www.suseforums.net/index.php?act=ST&f=20&t=39621 > > I've trying with another computer with SATA harddisk and OpenSUSE 10.3 > installed very well. It looks like that sata_sis driver has broken, > and the problem occured with this driver only. > > Vavai
I have the same problem. Foxconn motherboard (SiS), first hard drive IDE, second hard drive SATA. This is the relevant part of my start up log, from dmesg - I see the SATA entries are both trying to use IRQ 17, but don't know enough to know if that's a problem: SCSI subsystem initialized libata version 3.00 loaded. pata_sis 0000:00:02.5: version 0.5.2 ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16 scsi0 : pata_sis scsi1 : pata_sis ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00014000 irq 14 ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00014008 irq 15 ata1.00: ATA-7: SAMSUNG HD300LD, WK100-12, max UDMA/100 ata1.00: 586072368 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata2.00: ATAPI: SONY DVD RW DRU-700A, VY03, max UDMA/33 ata2.01: ATAPI: PLEXTOR CD-R PX-230A, 1.01, max UDMA/33 ata2.00: configured for UDMA/33 ata2.01: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD300LD WK10 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM SONY DVD RW DRU-700A VY03 PQ: 0 ANSI: 5 scsi 1:0:1:0: CD-ROM PLEXTOR CD-R PX-230A 1.01 PQ: 0 ANSI: 5 sata_sis 0000:00:05.0: version 0.8 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 17 sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode scsi2 : sata_sis scsi3 : sata_sis ata3: SATA max UDMA/133 cmd 0x0001e100 ctl 0x0001e202 bmdma 0x0001e500 irq 17 ata4: SATA max UDMA/133 cmd 0x0001e300 ctl 0x0001e402 bmdma 0x0001e508 irq 17 ata3: COMRESET failed (errno=960) ata3: reset failed (errno=960), retrying in 10 secs ata3: COMRESET failed (errno=960) ata3: reset failed (errno=960), retrying in 10 secs ata3: COMRESET failed (errno=960) ata3: reset failed (errno=960), retrying in 35 secs ata3: limiting SATA link speed to 1.5 Gbps ata3: COMRESET failed (errno=960) ata3: reset failed, giving up ata4: COMRESET failed (errno=976) ata4: reset failed (errno=976), retrying in 10 secs ata4: COMRESET failed (errno=976) ata4: reset failed (errno=976), retrying in 10 secs ata4: COMRESET failed (errno=976) ata4: reset failed (errno=976), retrying in 35 secs ata4: limiting SATA link speed to 1.5 Gbps ata4: COMRESET failed (errno=976) ata4: reset failed, giving up -- Bob openSUSE 10.3, Kernel 2.6.22.5-31-default, KDE 3.5.7 r72 Intel Celeron 2.53GB, 2GB DDR RAM, nVidia GeForce 7600GS -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
