On Thu, 2007-10-11 at 16:24 +0200, Johannes Meixner wrote: > Hello, > > On Oct 11 09:50 Kenneth Schneider wrote (shortened): > > Mine are: > > crw-rw-r-- 1 root lp 189, 3 2007-10-10 20:00 /dev/bus/usb/001/004 > > When you set up the scanner unit with YaST, it runs > /usr/lib/YaST2/bin/test_and_set_scanner_access_permissions > which does some magic to determine the USB device ID and write it to > /etc/hal/fdi/policy/10osvendor/80-scanner.fdi > so that the udev/HAL/resmgr machinery could do its magic to set > an appropriate ACL for the /dev/bus/usb/xxx/yyy device file. > > But the udev/HAL machinery doesn't notice changed *.fdi files > in the running system, see > https://bugzilla.novell.com/show_bug.cgi?id=218393#c28 > so that only a restart of HAL helps (or a reboot). > > Or the magic in test_and_set_scanner_access_permissions > may not work for your particular model so that there is > no entry in 80-scanner.fdi. In this case see > > http://sourceforge.net/mailarchive/message.php?msg_name=Pine.LNX.4.64.0707040850200.22081%40nelson.suse.de > > for several ways how to do it manually - perhaps you like it more > to add the users who should be allowed to scan to the "lp" group.
This would seem to be a much simpler method especially for new comers. > > > > > The simplest solution is to use the saned and the net meta-backend > > > on your local host to access the scanner, for example via > > > "YaST scanner setup" -> "Other" -> "Scanning via Network". > > > > This did the trick, thank you very much. > > But the little drawback is that now scanning-frontends for root > will "see" the scanner twice. Once directly as "hpaio:..." and > a duplicate via the net meta-backend as "net:localhost:hpaio:..." > (compare the "scanimage -L" output as root and as normal user). True, but I very rarely login as root. Most of root's work is done through su/sudo. And the side effect is I should be able to scan using my laptop without having to be physically connected to the scanner. :-) -- Ken Schneider UNIX since 1989, linux since 1994, SuSE since 1998 -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
