On Sat, 2007-10-13 at 14:26 +0200, Hans Witvliet wrote: > As you wish, Stephan... > > -------- Forwarded Message -------- > > First shot (with gm) at 10.3 > > System: hp dl320/G4 with 4GB, no extra hw-installed, was running 10.2 > Images were verified > > Before i try anything special, i always do a default installation, > nothing fancy selected. No-go this time! > > After installation (reboot) it returns > grub 21 > > Although i know that it's half of "life, universe and the rest" ;) > It's a bit short. > > Looking at http://www.uruk.org/orig-grub/errors.html > it got some more details about grub-errors. > > However, for 21 it says: > > 21 : "Unknown boot failure" > This error is returned if the boot attempt did not succeed for reasons > which are unknown. > > Wry thing is, at that stage, its not possible to examine any logfiles > as there is no other os on the system. > > Obviously, during the grub-install, something is forgotten, or went > wrong (will investigate further on monday). Would it be possible during > grub-install to perform a test to test if it succesfully installed the > bootloader. > > And if it fails this test don't reboot, but fall into the cli? > > Hans >
Today i try a re-run Re-installation no good, then i remembered that there were ( i mean are) issues with the raid controllers of the HP-DL320 (not with other machines) For those also with a DL320-G4: Change in the bios, the raid-config several times from raid-0 <==> raid-1, attach the disks to it, and reinstall! Other "weak" issue of those machines is that sometimes, after booting, eth0 had the mac-address 00:00:00:00:00:00. After a reboot siruation is normal ** ** as soon as i find a apropiated definition of "normal" Machine is currently running as dom-0 server, creation of dom-u lamp went without any problem. -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
