On Saturday 20 October 2007 11:38:16 pm Jim Flanagan wrote: ... > So, thinking that it must be a 10.3 issue, I installed 2 different > distros (something I had never done before). Pclinuxos and zenwalk both > run fine in gui, pclinuxos is running at 1280x1024 at 60hz. I don't > recall what zenwalk ran at, but it was higher than that. > > So, to me this must be a 10.3 issue. If I'm on the wrong track guys > please let me know. I'm not at all sure what to do next as I've never > seen a problem where nothing you try works.
.... Sax2.log --------- > 19-Oct 10:11:15 <I> [ Sysp: Server detection data > Card0 => DomainId : 0x0 > Card0 => BusId : 0x2 > Card0 => SlotId : 0x00 > Card0 => FuncId : 0x0 # Which is 2:0:0 xorg.conf --------- > Section "Device" > BoardName "RV250 If" > BusID "2:0:0" # and that is written in configuration Xorg.0.log: --------- ... > (II) PCI: PCI scan (all values are in hex) ... > (II) PCI: 02:00:1: chip 1002,496e card 1002,2003 rev 01 > class 03,80,00 hdr 00 # PCI: 02:00:1 ?? > (II) PCI: End of PCI scan ... > (II) Primary Device is: PCI 02:00:0 > (WW) fglrx: No matching Device section for instance (BusID PCI:2:0:1) found # sax2 and Xorg see different BusID's. That can be xorg or sax2. You may try to change manually xorg.conf line: BusID "2:0:0" to BusID "2:0:1" and see if that helps. If you have multiboot, it will be fine if you can supply head var/log/Xorg.0.log for all distros. You can snip output below 'Current Operating System:' line. That will tell what version of X Window System they use. It will be interesting to see what nvidia Xorg.0.log tells. BTW, do you have any other Xorg logs in /var/log/ -- Regards, Rajko. -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
