Hi, Marcus Meissner wrote: > On Sun, Oct 28, 2007 at 06:30:21PM +0100, Franz Petri wrote: >> Hi, >> >> I have the following problem with a Canon Powershot A550 digital camera: >> >> When plugging it into an arbitrary free usb-port it is recognized by KDE >> right away, but it takes ages (about 20-30 seconds) until it is >> accessible via konqueror. When copying images from the camera to a >> folder on the local hard disk the overall transfer rate is really slow >> (the image is copied ok, but after each image the progress "hangs" for >> several seconds). >> >> All this is acompanied by the folling dmesg-messages: >> >> usb 1-1.1.2: new full speed USB device using uhci_hcd and address 8 >> usb 1-1.1.2: new device found, idVendor=04a9, idProduct=3150 >> usb 1-1.1.2: new device strings: Mfr=1, Product=2, SerialNumber=3 >> usb 1-1.1.2: Product: Canon Digital Camera >> usb 1-1.1.2: Manufacturer: Canon Inc. >> usb 1-1.1.2: SerialNumber: 1E0C3F55EADF4F628CC92B882CE79D34 >> usb 1-1.1.2: configuration #1 chosen from 1 choice >> usb 1-1.1.2: reset full speed USB device using uhci_hcd and address 8 >> usb 1-1.1.2: reset full speed USB device using uhci_hcd and address 8 >> usb 1-1.1.2: reset full speed USB device using uhci_hcd and address 8 >> usb 1-1.1.2: reset full speed USB device using uhci_hcd and address 8 >> usb 1-1.1.2: reset full speed USB device using uhci_hcd and address 8 >> usb 1-1.1.2: reset full speed USB device using uhci_hcd and address 8 >> usb 1-1.1.2: reset full speed USB device using uhci_hcd and address 8 >> usb 1-1.1.2: reset full speed USB device using uhci_hcd and address 8 >> usb 1-1.1.2: reset full speed USB device using uhci_hcd and address 8 >> >> >> I have an Fujitsu Amilo M 7400 notebook with opensuse 10.3 with all the >> latest updates installed. >> >> Any advise? > > Please open a bugreport. I see the "reset" potentially giving us trouble here, > so I am trying to get a fixed libgphoto2 out.
As advised I opened the following report: https://bugzilla.novell.com/show_bug.cgi?id=339366 Thanks, Franz. > > Ciao, Marcus -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
