Hello Mathew, I recognize the problem. I upgraded/installed 3 systems, the first 2 installed with no problem. The third, which has a HPT370 raid diskcontroller ended up at the same point as yours with exactly the same error. I found no solution for this. It looks to me that something is wrong in the istallation kit. In the load of the kernel from cd my hpt370 is recognized but not used. At the end I decided to hold this (old) server on suse 10.2 until there is a new installation kit. Hans
Matthew Stringer schreef:: > On Thursday 15 November 2007 16:41:57 Mike Grau wrote: >> Hello. >> >> I have a Dell Poweredge 2850 with a MegaRAID 518 PERC 4/DC Raid >> controller. Opensuse 10.2 installed on this machine without a hitch. >> >> However, when I try to install 10.3, I get to the point where the >> install process is analyzing the system and it reports, "Error no hard >> disks were found for the installation. Please check your hardware." >> >> The only thing unusual prior to this is when modules are being loaded, >> the "loading megaraid_mbox" takes forever (3 minutes or more), but >> finally does appear to load and no errors are displayed. I don't know if >> this takes so long because the disks weren't seen, or if the hard disk >> can't be found because of a problem with the megaraid driver. >> >> Pointers? I'm pretty much a newbie a troubleshooting this kind of thing. >> All my previous installs have pretty much been trouble free. >> >> Thanks! >> -- Mike > -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
