Hi.
I run opensuse 10.3.
Obviously there has been an automatic update on my system.
I cannot even run yast now. I get a message it's not there.
I now have this in menu.lst:
# Modified by YaST2. Last modification on Wed Nov 21 16:29:50 CET 2007
default 0
timeout 8
gfxmenu (hd0,1)/boot/message
##YaST - activate
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.3 - 2.6.24-rc2-git6-28
root (hd0,1)
kernel /boot/vmlinuz-2.6.24-rc2-git6-28-default
root=/dev/disk/by-id/scsi-SATA_Maxtor_6Y080L0_Y21VHZMC-part2 vga=0x31a
resume=/dev/sda1 splash=silent showopts
initrd /boot/initrd-2.6.24-rc2-git6-28-default
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.3 - 2.6.24-rc2-git6-28
root (hd0,1)
kernel /boot/vmlinuz-2.6.24-rc2-git6-28-default
root=/dev/disk/by-id/scsi-SATA_Maxtor_6Y080L0_Y21VHZMC-part2 vga=normal
showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0
edd=off 3
initrd /boot/initrd-2.6.24-rc2-git6-28-default
###Don't change this comment - YaST2 identifier: Original name:
linux-2.6.22.12-0.1-bigsmp###
title openSUSE 10.3 - 2.6.22.12-0.1
root (hd0,1)
kernel /boot/vmlinuz-2.6.22.12-0.1-bigsmp
root=/dev/disk/by-id/scsi-SATA_Maxtor_6Y080L0_Y21VHZMC-part2 vga=0x31a
resume=/dev/sda1 splash=silent showopts
initrd /boot/initrd-2.6.22.12-0.1-bigsmp
###Don't change this comment - YaST2 identifier: Original name:
failsafe-2.6.22.12-0.1-bigsmp###
title Failsafe -- openSUSE 10.3 - 2.6.22.12-0.1
root (hd0,1)
kernel /boot/vmlinuz-2.6.22.12-0.1-bigsmp
root=/dev/disk/by-id/scsi-SATA_Maxtor_6Y080L0_Y21VHZMC-part2 vga=normal
showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0
edd=off 3
initrd /boot/initrd-2.6.22.12-0.1-bigsmp
###Don't change this comment - YaST2 identifier: Original name:
linux-2.6.22.12-0.1-debug###
title Debug -- openSUSE 10.3 - 2.6.22.12-0.1
root (hd0,1)
kernel /boot/vmlinuz-2.6.22.12-0.1-debug
root=/dev/disk/by-id/scsi-SATA_Maxtor_6Y080L0_Y21VHZMC-part2 vga=0x31a
resume=/dev/sda1 splash=silent showopts
initrd /boot/initrd-2.6.22.12-0.1-debug
###Don't change this comment - YaST2 identifier: Original name: floppy###
title Floppy
rootnoverify (hd0,1)
chainloader (fd0)+1
The new here is the openSUSE 10.3 - 2.6.24-rc2-git6-28
I tried the old one I used:
openSUSE 10.3 - 2.6.22.12-0.1
It booted and started up my KDE windows.
But I couldn't get Yast started up at all.
What could be the reason ?.
Am I trapped in a situation where I have to install 10.3 from schratch
again ?
TIA
/Erik
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
