On Mon, 2007-12-03 at 13:16 +0800, Art Fore wrote: > I have a MITSUMI USB FDD 061M but when I plug it in, I do not get > anything. > > lsmod |grep usb results in > > usb_storage 94784 1 > ide_core 142792 1 usb_storage > hci_usb 33052 2 > bluetooth 81764 7 rfcomm,l2cap,hci_usb > usbhid 64608 0 > usbcore 140676 6 > usb_storage,hci_usb,usbhid,uhci_hcd,ehci_hcd > scsi_mod 149000 5 usb_storage,sr_mod,sg,libata,sd_mod > > If I look in Kinfocenter, under usb devices I have > > UUHCI Host Controller (4) > > Manufacturer: Linux 2.6.18.8-0.7-bigsmp uhci_hcd > Serial #: 0000:00:1d.2 > > > Class > 9 > (Hub) > Subclass > 0 > (Unused) > Protocol > 0 > USB Version > 1.10 > > Vendor ID > 0x0 > Product ID > 0x0 > Revision > 2.06 > > Speed > 12 Mbit/s > Channels > 2 > Max. Packet Size > 0 > > Bandwidth > 0 of 900 (0%) > Intr. requests > 0 > Isochr. requests > 0 > > > and under that I get > > MITSUMI USB FDD 061M > > Manufacturer: MITSUMI > > > Class > 0 > ((Defined at Interface level)) > Subclass > 0 > Protocol > 0 > USB Version > 1.10 > > Vendor ID > 0x3ee > (Mitsumi) > Product ID > 0x6901 > (SmartDisk FDD) > Revision > 2.00 > > Speed > 12 Mbit/s > Channels > 0 > Max. Packet Size > 0 > > > If I look under SCSI device I see the Misume listed 8 times > > Host: sccsi8 Channell: oo id: 00 Lun:00 > Vendor MITSUMI Model USB FDD 061M Rev:2.00 > > Host: sccsi8 Channell: oo id: 00 Lun:01 > Vendor MITSUMI Model USB FDD 061M Rev:2.00 > > Host: sccsi8 Channell: oo id: 00 Lun:02 > Vendor MITSUMI Model USB FDD 061M Rev:2.00 > > etc wutg Lun: going up to 07. > > Can someone tell me from the above information how I would mount this > beast or where else I could find the appropriate info to do so? > > Art > > All of a sudden, the floppy is showing up as External Floppy under my computer. When I right click and do mount on it, it comes up with
Method "Mount" with signature "ssas" on interface "org.freedesktop.Hal.Device.Volume" doesn't exist There is a floppy disk in the drive with files on it that can be read by WinXP. Searching the internet, there are a number of emails about this on Suse 10.1 and a patch was supposedly made to fix it. I am running 32-bit Suse 10.2 of which there is no mention. Does anyone have any other suggestions? Art -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
