>>>>> "M" == M Harris <[EMAIL PROTECTED]> writes:
M> On Friday 04 January 2008 06:04, jpff wrote: >> most seems to be >> working, except that the mounting of memory sticks no longer works. I >> used to use ivman as a user (non-root) but not when I run it it does >> not mount. M> What errors do you see in the syslog, or on screen? None; no error messages at all usb 4-3: new high speed USB device using ehci_hcd and address 2 usb 4-3: new device found, idVendor=1976, idProduct=6025 usb 4-3: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 4-3: Product: Flash Disk usb 4-3: Manufacturer: USB2.0 usb 4-3: SerialNumber: 1321430060FC9D02 usb 4-3: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning scsi 2:0:0:0: Direct-Access USB2.0 Flash Disk 5.00 PQ: 0 ANSI: 2 sd 2:0:0:0: [sdb] 249856 512-byte hardware sectors (128 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08 sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] 249856 512-byte hardware sectors (128 MB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08 sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI removable disk sd 2:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete M> What messages do you get when you attempt a manual mount? It mounts as expected, but I have to be root M> Do you see your usb controller(s) in an lspci -v printout? Sure I have just noticed the processes 4936 ? Ss 0:00 ivman 4938 ? S< 0:00 [scsi_eh_2] 4939 ? S< 0:00 [usb-storage] 4964 ? S 0:00 hald-addon-storage: polling /dev/sdb (every 16 sec) which is odd as it should be mounting /dev/sdb1 which works my hand So it still looks like the change to sdX ==John ffitch "This research is of insufficient standard" -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
