Hi, i tested the new rc2 with an OTC Model 1564. If I set PXE-boot in the BIOS of the TC everything works as expected and I can flash the TC. However if I try to use the gPXE entry from grub menu of the newly flashed TC it doesn't work. All I get is the following lines:
---snip--- WARNING: Using legacy NIC wrapper on xx:xx:xx:xx:xx:xx gPXE 0.9.5+ -- Open Source Boot Firmware -- http://etherboot.org Features: HTTP DNS TFTP AoE iSCSI bzImage COMBOOT ELF Multiboot PXE PXEXT net0: xx:xx:xx:xx:xx:xx on PCI00:12.0 (open) [Link:up, TX:0 TXE:0 RX:0 RXE:0] Waiting for link-up on net0... ok DHCP (net0 xx:xx:xx:xx:xx:xx).... ok net0: 10.xx.xx.xx/255.255.0.0 gw 10.yy.yy.yy No filename or root path specified No more network devices rhine disable Intel UNDI, PXE-2.0 (build 082) Copyright (C) 1997,1998,1999 Intel Corporation VIA Rhine II Fast Ethernet Adapter v2.24 (2003/04/14) PXE-EC8: !PXE structure was not found in UNDI driver code segment. PXE-M0F: Exiting Intel PXE ROM. DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER ---snap--- With best regards Oliver Kaltenecker ------------------------------------------------------------------------------ Lotusphere 2011 Register now for Lotusphere 2011 and learn how to connect the dots, take your collaborative environment to the next level, and enter the era of Social Business. http://p.sf.net/sfu/lotusphere-d2d _______________________________________________ The Open Source Thin Client Solution http://openthinclient.org [email protected] https://lists.sourceforge.net/lists/listinfo/openthinclient-user
