Hi!
I still experience problems with the resolution of widescreen monitors
(1680 x 1050).
Technical Data of my Monitor are as follows:
Dimensions and weight (LCD monitor)
Visible diagonals: 55.87 cm ( 22 ''wide)
Screen size : 473.76mm x 296.1mm
Dimensions (W x H x D) incl. monitor base : 511mm x 409.5mm x 202mm
Dimensions box (W x H x D): 555mm x 437mm x 188mm
Weight : 5.2kg / 6.5kg
Dot pitch : 0.282 mm
Maximal resolution : 1680 x 1050 pixels
Electrical data
Video: analogue, positive, 0.7 Vpp, 75 Ohm,
Synchronisation : Separate H/V-sync
Horizontal frequency: 31.5 kHz ~83 kHz
Refresh rate: 56 Hz ~ 76 Hz
Maximum pixel rate: 165 MHz
Power supply: AC 100~240V, 50~60Hz
Total power consumption: < 35 W
< 0.3 W (standby)
Preset operating modes
The picture position and size have been set set to optimum values at the
factory for the
operating modes listed above.
Display resolution = 1680 x 1050
Refresh rate = 60Hz
Horizontal frequency = 65.3kHz
I tried to calculate a modline at
http://xtiming.sourceforge.net/cgi-bin/xtiming.pl with negativ results.
How is a modline supposed to look like that should work with my monitor?
Could somebody post the exact syntax. Are there any settings to be
configured in OTC other than the modline?
Or is my problem related to a not supported graphics card or a driver
problem with OTC operating system. On older hardware i got widescreen
working with the default settings of the hardware device "Monitor:
1680x1050@75" .
In my test environment I use the Intel Q33 chipset with onboard graphics
GMA 3100.
------------------------------------------------------------------------------
Got Input? Slashdot Needs You.
Take our quick survey online. Come on, we don't ask for help often.
Plus, you'll get a chance to win $100 to spend on ThinkGeek.
http://p.sf.net/sfu/slashdot-survey
_______________________________________________
The Open Source Thin Client Solution http://openthinclient.org
[email protected]
https://lists.sourceforge.net/lists/listinfo/openthinclient-user
