Hi! I'm experiencing a strange problem. I have a domain controller
(Win2003) with DHCP and DNS and a terminalserver (Win2008r2). OTC is
installed on the terminalserver. Both Servers are connected direktly to
a switch. Also connected directly to this switch are most of the
clients. I have a second switch connected to the main switch to multiply
network connections in my room.
Clients connected direktly to the main switch boot slowly. First the
DHCP process takes quiet a long time until the client recieves the
OTC-packages. Then first the splash screen appears for a while but
disappears again after a few seconds... After that only those (for me)
obscure linux lines run through and sometimes even halt for a while.
Finally OTC starts and opens RDP. The whole process takes up to three
minutes.
If I start a Client connected to the switch in my room the whole process
is much faster. The time until the client receives the OTC package is
much shorter. While booting the splashscreen never disapears. All in all
it takes 1 minute to boot into rdp!
I tested this behaviour with a couple of clients. It is reproducible.
Anyone any ideas?
------------------------------------------------------------------------------
Doing More with Less: The Next Generation Virtual Desktop
What are the key obstacles that have prevented many mid-market businesses
from deploying virtual desktops? How do next-generation virtual desktops
provide companies an easier-to-deploy, easier-to-manage and more affordable
virtual desktop model.http://www.accelacomm.com/jaw/sfnl/114/51426474/
_______________________________________________
The Open Source Thin Client Solution http://openthinclient.org
[email protected]
https://lists.sourceforge.net/lists/listinfo/openthinclient-user
