Thanks a lot for the answer,
2013/8/2 Mark D-B <newsgroup....@virginmedia.com>
> Dear Mick,
>
> I haven't tried this myself (no iPXE at home today) but it looks like
> something along these lines should work:
>
> #!ipxe
> chain tftp://<OTC SERVER IP ADDRESS>/pxelinux.0
>
> See http://ipxe.org/cmd/chain.
>
I'm not 100% sure, but i tried this and it didn't work. I'll try again asap
>
> This of course assumes that your OTC server has a fixed IP address. Note
> that you do not need to use the path on the OTC server - only the bit below
> the TFTP server root (which in this case is just pxelinux.0).
>
> This should not be necessary though, as the OTC proxy DHCP normally just
> works - it doesn't need a next-server set like most other thin client PXE
> setups. Your gPXE isn't a version prior to May 2009 is it, as this doesn't
> (according to Internet) support proxy DHCP?
>
I'm using the latest gPXE and iPXE.
>
> Also, if you are using user-defined mac addresses in iPXE for some
> reason, remember that this means that you will need a different client
> configuration in the OTC manager from that used for a hardware PXE boot as
> the client will not be recognised otherwise.
>
No i'm not using a user defined mac and the client is already listed as a
thinclient inside OTC manager.
>
> If this still doesn't work, I advise using a network traffic analyser of
> some kind to see what is going on with the server(s) TFTP traffic
> responding to PXE - I have found this saves loads of time trying to work
> out why clients aren't booting.
>
K, i'll try that too. Thanks again.
>
> All the best,
>
> Mark
>
>
> ------------------------------------------------------------------------------
> Get your SQL database under version control now!
> Version control is standard for application code, but databases havent
> caught up. So what steps can you take to put your SQL databases under
> version control? Why should you start doing it? Read more to find out.
> http://pubads.g.doubleclick.net/gampad/clk?id=49501711&iu=/4140/ostg.clktrk
> _______________________________________________
> The Open Source Thin Client Solution http://openthinclient.org
> openthinclient-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
>
>
------------------------------------------------------------------------------
Get your SQL database under version control now!
Version control is standard for application code, but databases havent
caught up. So what steps can you take to put your SQL databases under
version control? Why should you start doing it? Read more to find out.
http://pubads.g.doubleclick.net/gampad/clk?id=49501711&iu=/4140/ostg.clktrk
_______________________________________________
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user
